Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Deadwood and mast timber
-
31st May 2012, 08:27 PM #1Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
Deadwood and mast timber
I'm looking for timber to build the deadwood, mast and other jobs on my boat. I have a source for KD oregon but it seems to be all flat sawn, but otherwise very good quality. They also have green oregon in long lengths but the ring count is about half the KD stuff. I could get them to cut me knot free lengths which I could store for drying ( risky? ) down to a lower moisture level.
I'm wondering about Hoop Pine, but is it suitable for deadwood etc. The sort of sizes I need are 125x50 finished, in lengths up to about 16 ft.
Any other suitable timbers out there does any one know?
Andrew"World's oldest kid"
-
31st May 2012 08:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st May 2012, 08:53 PM #2
for the dead wood, use grey gum , flood gum , and for the mast you can use Hoop Pine , stronger than OG pine and lighter.
Jeff
-
31st May 2012, 10:05 PM #3Senior Member
- Join Date
- Dec 2004
- Location
- Rushworth, Victoria
- Posts
- 381
Jeff,
What is the weight of those timbers like and how do they glue/work
Andrew"World's oldest kid"
-
1st June 2012, 10:00 AM #4
Andrew,
I do not have specific weights for the timbers, I have used flood gum for the keel & sacrificial on a 17Ft inboard, with no issues, and Hoop pine for a couple of boats I have built .
You could call LINDSAY MEYERS , in Clontarf QLD for the info on Hoop Pine.
Jeff
Similar Threads
-
Timber NS14 Mast
By graemet in forum BOAT BUILDING / REPAIRINGReplies: 6Last Post: 21st June 2010, 10:13 AM -
Mast timber
By White Tiger in forum BOAT BUILDING / REPAIRINGReplies: 16Last Post: 5th March 2009, 11:26 AM -
Mast making - Grain direction for mast staves
By m2c1Iw in forum Michael Storer Wooden Boat PlansReplies: 3Last Post: 4th February 2008, 10:44 PM -
Mast timber question for the masters!
By Wild Dingo in forum BOAT BUILDING / REPAIRINGReplies: 13Last Post: 23rd July 2006, 02:36 AM -
D5 mast timber
By jsietsma in forum BOAT BUILDING / REPAIRINGReplies: 9Last Post: 1st October 2004, 04:04 PM