Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    May 2006
    Location
    Lake Macquarie NSW Australia
    Posts
    402

    Default What about Fido??

    A question for Dog Owners and Woodworkers!

    How do you keep your best mate safe from the wood dust?
    There are threads about dust hazards and allergies caused by woodworking, and threads about "my best mate" who spends time with me in the shed!

    Whilst we are worried about inhalation of all the nasties and skin contact from the wood resins/dust for your own health - what about "Fido"?

    I have a little mate that wants to be with me every waking moment and I am concerned that he is breathing and in contact with the same evils as me.

    Who has the answer? What have you done to protect your mate?

    regards, Ned

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    16,560

  4. #3
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,790

    Default

    Quote Originally Posted by Black Ned View Post
    Who has the answer? What have you done to protect your mate?
    I installed a fume hood and a 500 cfm fume extractor to remove welding fumes, and a 3HP DC with 6" ducting that vents to outside the shed. The DC theoretical extracts the entire volume of the shed in about 3 minutes but in practice it takes about 10 minutes to vent the shed. But bugger the dog - this is for me - OK the dog gets the benefit

  5. #4
    Join Date
    Feb 2011
    Location
    Bathurst NSW
    Age
    82
    Posts
    530

    Default

    Quote Originally Posted by Big Shed View Post

    What a patient and co-operative mate! Looks well outfitted in the mask too.

  6. #5
    Join Date
    May 2006
    Location
    Lake Macquarie NSW Australia
    Posts
    402

    Default

    The reason for the initial enquiry was because I have seen many posts where reference has been made to the dog lying under the work-centre or on the floor or somewhere in the shed where it will be covered in sawdust or shavings from the work as it's being done, or, after the machinery is turned off. We all know that from lot of questions about dust collectors, it suggests that there is a lot of woodworkers who do not have the shed fully immune to dust. Dogs like to sniff everything and roll in all sorts of things. So what about Fido? - Is he getting a fair go?, or, he'll be right!

    regards, Ned

  7. #6
    Join Date
    Apr 2005
    Location
    Queensland, Aus
    Age
    72
    Posts
    776

    Default

    Maybe, if there's a Vet on board, he/she may be able to comment.

    For mine dogs seem to know what they do and do not like and, in any event, I suspect they don't live long enough for the more insidious effects to take a hold


    Ian

  8. #7
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,772

    Default

    Just asked Dr MrsArcher. She's a Vet.
    Short answer. No. Not a problem.
    Long answer: Although dogs are susceptable to lung cancer, more commonly from second hand cigarette smoke, the incidences are quite uncommon. They may be susceptable to cancer from the carcinogens in wood dust but the incidences would be very rare.
    Best practise would be to limit your mates exposure by leaving him outside while using dust making machinery. Would be better for his hearing as well.
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  9. #8
    Join Date
    May 1999
    Location
    Grovedale, Victoria Australia
    Age
    66
    Posts
    3,896

    Default

    Best practice is to have the correct amount of dust extraction on all machinery for both you and your mate.
    Jim Carroll
    One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!

  10. #9
    Join Date
    Feb 2011
    Location
    Bathurst NSW
    Age
    82
    Posts
    530

    Default

    Quote Originally Posted by Jim Carroll View Post
    Best practice is to have the correct amount of dust extraction on all machinery for both you and your mate.


Similar Threads

  1. Fido
    By Wood Borer in forum WOODIES JOKES
    Replies: 1
    Last Post: 1st December 2005, 09:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •