Hi

Back by popular demand Woodpeckers One Piece T Squares 75mm, 150mm & 200mm

[ame="http://www.youtube.com/watch?v=UVAfsgZiEGw&feature=player_embedded"]One Piece T Squares[/ame]



Woodpeckers T-Squares are designed with two important facts in mind. First, we know that joinery and hardware layout almost always uses a work piece edge as the reference surface. Secondly, many woodworkers use mechanical pencils for layout because of the accuracy that’s possible with a thin, uniform lead. Woodpeckers T-Squares have a broad, precisely machined lip that registers solidly along the edge of your board, and a shaped blade with micro-fine holes spaced 1mm apart.

When you put the tip of your mechanical pencil or a sharp standard pencil in one of these holes and slide the square along your work piece, you’ve got a layout line you can take to the bank. And of course you can then mark against the sides of the blade to complete your layout. Each side is beveled to a 30 degree angle with precise, laser engraved scale marking pitched right down to the surface.

Woodpeckers one piece T-Squares have no moving parts to shift out of place like with a combination square. What you get instead is a T-Square machined from a solid piece of aircraft-grade aluminum, with micro-fine 1mm diameter holes that guide the tip of your pencil to the exact location. The holes are organized on the blade so you’ll find it easy to exactly repeat any layout details.

This special run of three metric sizes, 75mm, 150mm and 200mm are also available. The scale and marking hole spacing is1mm.

Woodpeckers One Piece T-Squares are made to order as part of the ONE-TIME Tool program. The last day to order is July 23rd with delivery expected October 2012. Hop in and order yours now!!!