Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 24
Thread: wood to use for monkey bars
-
2nd August 2012, 03:07 PM #1New Member
- Join Date
- Aug 2012
- Location
- Atlanta
- Posts
- 7
wood to use for monkey bars
Hello everyone,
I'm building monkey bars for my children and trying to find what wood will work best for the bars. I'm currently looking into oak, beech, birch and maple dowel rods of 1-1/4 inches dia. Any recommendations would be highly appreciated.
Thanks,
Bahty
-
2nd August 2012 03:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd August 2012, 04:23 PM #2
What did they make the old wooden ladders from out your way.
I guess if it holds a 100 kg man up it should hold your kids.
See if you can find an old ladder somewhere, may not be ok as a ladder but put that up on posts.
Peter
-
2nd August 2012, 04:37 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
-
2nd August 2012, 10:07 PM #4
G'Day & welcome to a top forum "down under" Bahty,
A few years back I built a set of "Wall bars" for the local Boys & Girls Club.
I used 32mm dia [1-1/4"] Tassie Oak stock [Australia Hardwood];
plus 4" x 2" Structual framing Timber for the base & uprights.
Have a talk to your local timber merchant for advice [lumber supplier].
I hope that's some help.
Enjoy the forum as we have a whole heap of helpful & knowledgable blokes & ladies and for the most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP photos with build notes.
Enjoy your woodwork & good luck with the "monkey bars",
Cheers, crowie
-
2nd August 2012, 11:44 PM #5
Hi Bahty,
I'm from the UK but speak the same trees as you.
I'd go with Ash for it's springiness and ability to withstand shocks (it was used to make wagon wheels).
Another wood you have is Hickory - popular even with us for the same reasons as above and used more commonly as tool handles.Dragonfly
No-one suspects the dragonfly!
-
3rd August 2012, 12:21 AM #6New Member
- Join Date
- Aug 2012
- Location
- Atlanta
- Posts
- 7
Ash sounds like a good option. For some reason it got out of my list. Thanks a lot!
-
3rd August 2012, 01:54 AM #7
Bahty
My comments following are going to depend on the overall length of your monkey bars.
1 1/4" sounds about right for the rungs but would be too light I think for the rails. To give you some idea the parallel bars in gymnastics are just shy of 12' long (3.5m) and are 2" (50mm)deep and 1 1/2" (40mm) wide in a rounded shape that is wider at the top than the bottom.
Whilst I don't imagine the kids will be putting the monkey bars to the same level of punishment as the olympic gymnasts, I could envisage eight or so going across at one go attempting a world record for the most kids on a monkey bar.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
3rd August 2012, 10:09 AM #8
G'day Paul,
I do maintenance at our local Boys & Girls Club wihich has a full gymnastics program for some 400 gymnastics each week.
The "P Bars" are a made item; they have a steel rod up the centre with 2 laminated halves of timber wrapped around them. Oval in shape as you said.but way stronger than just timber.
The "High Bar" is steel though we do have a fibreglass one for the girls to train on [little larger diameter].
The "Uneven Bars" are reinforced fibreglass.
The "Wall Bars" are 32mm [1-1/4"] dia Tassie Oak but are only 3.6mtrs wide giving 3 sets of bars [ie 4 uprights].....
Sorry for going on a bit.
Cheers, crowie
-
3rd August 2012, 01:25 PM #9New Member
- Join Date
- Aug 2012
- Location
- Atlanta
- Posts
- 7
Paul,
Sure enough I would love to see my kids preparing for Olympics, but this wont happen at least in the next 7-10 years
I am trying to do monkey bars similar to this image, but with slight variations:
I make both horizontal and vertical rails from 2x6 (inches... sorry for that) pine. Vertical rails are 6 feet and 7 feet and horizontal rails are 8 feet. Rungs are 1-1/4x36 inches ash (as recommended here). Distance between rungs on horizontal rails is 11 inches and 10 inches on vertical ladder.
-
3rd August 2012, 03:04 PM #10
Is it for indoor or outdoor use?
-
3rd August 2012, 03:57 PM #11New Member
- Join Date
- Aug 2012
- Location
- Atlanta
- Posts
- 7
this is for indoor use only. good point
-
3rd August 2012, 08:28 PM #12
-
3rd August 2012, 08:33 PM #13Bushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
3rd August 2012, 09:49 PM #14
G'Day Paul, What club are you involved with please?
I seem to be a gymnastics widower as my wife is a level 2 coach & head coach plus judge and I have 2 of my 2 daughter who all used to do gymnastics now also coaching.
Keeps me off the street and in the shed.
Cheers, crowie
-
4th August 2012, 08:34 PM #15
Before I reply to crowie, I have to apologise to Bahty as I can see I am about to partly highjack your thread. This is something that is frowned upon by the administrators and of which I, and many others, are frequently guilty. However I was raised on digressions and having said that, I think at least some of the content may be relevant.
Crowie
You have partly sprung me as my involvement with gymnastics is tenuous tending to non-existant. I don't belong to a club and indeed I never have. I last competed, at the tender age of 12 years, in 1962 in the under 16 national championships in the UK. That is my sole qualification to comment on gymnastic apparatus.
It was the sport at which I was best, but the one I pursued least. I have no illusions: I was and would have been an "also ran." However, I loved it, and in nostalgic terms my cup brimeth over.
So how did I come to the detail regarding parallel bars? About three years ago I had both hips replaced and realised that it would be very easy to resign myself to a sedentary existence. I have not undertaken any dedicated exercise since my late twenties although I would have described myself as active.
Following my ops, in a moment of madness, I decided to build myself a set of modified parallel bars and in another moment of insanity I made them to resemble the olympic versions.
The reference I used for the build can be found in this link:
http://www.gymogturn.no/konkurranse/...orm%202009.pdf
Pages 44-46 refer to the parallel bars, but as you will see every piece of olympic apparatus is included in the 164 pages.
My bars only resemble the real thing as they are about 1500mm long instead of 3500mm, they adjust upwards, but not in their width and there is no articulation where the rails are held to the uprights. So all in all they are nothing like the real thing.
I used recycled Spotted Gum (they were the farrowing bars from a piggery so they have an interesting aroma when they are being machined), but as I am in QLD they are probably in reality Lemon Scented Gum, which is very similar but to my mind has a less attractive grain. All the steel was recycled scrap.
Just as a matter of interest the cross section of the bar tapers towards the bottom so it is more than just an oval. Again the specification for this can be found on page 46 of the link.
Do I use these bars to the full? Absolutely not! I'd kill myself. I get into position on the bars, nod to the imaginary judges and ponder what I might have been able to do 40 to 50 years ago and then get down again. I am in denial: There is no disputing that.
I have attached some pixs for reference. The bars look a little weathered, which is mainly because the bars are always out in the weather. They are sitting between two shipping containers, which I plan to couple with a shed across them, but this hasn't happened yet.
Unlike you, my family has never shown any interest in sporting activities. However, when I made the bars, my son, who is not a large person (he's probably the right size for a gymnast) jumped up and put himself into a near horizontal hold just supported on his arms. I think it would almost equate to the crucifix position on the rings. I was impressed and demoralised all at the same time.. As he is thirty it is too late for him too and far too many beers have gone under the belt.
Regards
PaulLast edited by Bushmiller; 5th August 2012 at 08:29 AM. Reason: Thought I had better spell "parallel" correctly
Bushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
Similar Threads
-
How would YOU make monkey bars?
By perthmum in forum WOODWORK - GENERALReplies: 7Last Post: 18th November 2010, 10:03 PM -
Monkey pod
By powderpost in forum WOODTURNING - GENERALReplies: 2Last Post: 2nd July 2008, 06:19 PM -
Kids play equipment. Monkey bars & Sand Pit Digger
By geocacher in forum METALWORK FORUMReplies: 15Last Post: 28th September 2007, 09:49 AM -
Monkey see, monkey do?
By Skew ChiDAMN!! in forum WOODIES JOKESReplies: 3Last Post: 5th January 2007, 09:47 PM -
something about a monkey ...
By Eastie in forum WOODIES JOKESReplies: 2Last Post: 27th May 2002, 10:15 PM