Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Arche 12 piece Router bit set
-
7th May 2005, 07:27 PM #1Member
- Join Date
- Apr 2005
- Location
- Geelong, Victoria
- Posts
- 53
Archer 12 piece Router bit set
In the Carbatec SALE flyer, on the back page there is a special for a 12 bit router set.
Anybody had any expeirence with these bits? For basic general work, they look like a good selection, and a good price.
-
7th May 2005 07:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th May 2005, 12:54 AM #2Originally Posted by ozzieflyer
Had a set for about 6mths, couple of them have had much use they hold their edge quite well(only just touched up the 1/2"roundover the other day). The bearings seem to be of good quality too.
I havent used them on hard wood, but have used them on mdf/chip.....................................................................
-
8th May 2005, 09:30 AM #3
Yer Harry put me onto these and have had no complaints or probs I've been useing them regularly for the past 2 months and are holding up well.............but same as Harry I have only been using them on MDF & Melamine......REgardless for the price TOP Value and one of my better buys of recent times.
REgards LouJust Do The Best You Can With What You HAve At The Time