Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Unimig Craft 200 - no arc
-
24th February 2014, 08:27 PM #1Member
- Join Date
- Dec 2010
- Location
- Morayfield, Queensland
- Posts
- 51
Unimig Craft 200 - no arc
Hi Guys,
I have an old Unimig Craft 200 mig that has no arc. Wire feed & gas solenoid is working ok just no arc. Does anyone have a circuit diagram or an idea on what may be the problem ? Have checked over all the connections. Nothing is loose or broken.
John
-
24th February 2014 08:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd March 2014, 05:50 PM #2
-
3rd March 2014, 09:58 PM #3Member
- Join Date
- Dec 2010
- Location
- Morayfield, Queensland
- Posts
- 51
Yes Matt , good suggestion but I would like a circuit diagram before I go poking around so I know what voltages to look for ?
John
-
5th March 2014, 06:31 PM #4Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 55
Have a look at the contactor, check you have the same voltage across both sides when it is energised ,It is common for the contacts to burn away over time
Similar Threads
-
My Unimig Procraft 240
By martrix in forum WELDINGReplies: 7Last Post: 20th August 2009, 10:12 PM -
UniMig Welders
By silash77 in forum WELDINGReplies: 4Last Post: 9th August 2009, 08:01 PM -
Inverter Unimig 165-190
By patrolos in forum WELDINGReplies: 2Last Post: 27th June 2009, 07:54 PM -
unimig jasic welders
By northerncat in forum WELDINGReplies: 8Last Post: 14th May 2009, 11:39 PM