Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2003
    Location
    rural qld
    Age
    67
    Posts
    148

    Default roofing / cleaning /repairs

    well 2 of us have spent a week clearing out the ceiling cavity in my old hse took a day to get the manhole cut and then started cleaning 100yrs of rubbish out of the ceiling tried brooms and dustpans ok but the bags where filling fast next the air compressor to blow the stuff out but after 5 mins couldnt see at all or breathe next got the garden blower/vac up there but the dust went straight thru the bag as bad as the compressor so went to the hardware store and got some plastic flume pipe put that on the blower /vac ran it out the edge of the eaves ( they are open eaves ) so was able to run the pipe straight out success got rid of heaps in a very short time .

    But haveing done that found that some of the timbers in the roof where stuffed years of water damage etc so ended up having to take off all the end of one of the gables and replace some of the bearers that where there so while the end off decide to re blow it and couldnt believe how much stuff was still up there so while doing that am going to put in the isulation and some chicken wire as well to stop the possums and of cousre tonight is blowing like mad and looks like rain as well just my luck

    now i was also thinking of putting in a few sheets of the clear roofing stuff (versalight ??) to get some light up there and also then install some ' frosted glass windows ' in the ceilings inside , as its a very dark hse would this work would the stuff last and would it join in with the old metal roofing ?? anyone got any ideas ??
    thks david

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    May 2005
    Location
    Newcastle
    Age
    72
    Posts
    3,363

    Default

    As for cleaning out bought a vax started at the manhole cleaned around it then installed a hatch with fold down ladder then did the rest
    reckon it was about 2 tonne in total , it had a tin roof that had been replaced with a tile roof but no debris removed in between
    Now have a great workshop vacuum cleaner and I can shampoo rugs as well


    The trouble with life is there's no background music.



  4. #3
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    Most people would be horified if they knew how much rubish is in their cielings.
    You probebly need to look at getting the roof space at least partly sealed up to stop the stuff blowing in there.
    Unsealed eaves.
    stuff comes happily blowing allong in the wind, wind hits the wall & goes straight up under the eaves taking garbage with it into the roofspace.

    A very nasty bushfire hazard. Sparks will do the same.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

Similar Threads

  1. Cleaning new router bits.
    By Ads Mac in forum TRITON / GMC
    Replies: 9
    Last Post: 11th May 2005, 12:48 AM
  2. Veritas Honing Jig - Cleaning
    By mat in forum SHARPENING
    Replies: 1
    Last Post: 11th March 2005, 11:41 AM
  3. Polished Floorboards... cleaning?
    By Bain in forum WOODWORK - GENERAL
    Replies: 13
    Last Post: 25th November 2004, 11:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •