Lie-Nielsen Inlay tool extension arms.

[goodwoody]

Groovers , Of late I have been interested in experimenting with some inlay and purchased the Latta tool from LN. I was doing a clock and needed to create a wider radius so I needed some of the extension arms. I looked at Henry Eckert tools and they had them for sale but I thought I would have a bash at making some. Enfieldguy donated some 1/4 inch stainless rod and I called in to see the neighbour and got talking to his old man who happened to be a retired machinist (very Handy). Anyway dialled up the steel in the 4 jaw cut the required 8-32 thread after LN sent me a schematic of the threads (fab service). Machined the threads and a slot at the end of the rod and the pictures show the rest. Damien.

Big thanks to Enfieldguy.042.JPG043.JPG044.JPG

[Enfield Guy]

My pleasure young man!!
Cheers

[goodwoody]

Thanks again Enfieldguy. Just letting you know that the stainless was put to good use. Damien.

[Christos]

Now that another good result. Well done Enfieldguy

[Superbunny]

The September issue of AWR will have my review of both LN and Veritas inlay tools.

SB

[goodwoody]

That should be a very interesting read.

[Superbunny]

The September issue of AWR will have my review of both LN and Veritas inlay tools.

SB

Just got my copy and I'm on the back page all by my self, god I look handsome and just to think swmbo made me put on a clean shirt for the pic.

SB