Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Tallow wood
-
11th October 2014, 09:57 PM #1New Member
- Join Date
- Aug 2012
- Location
- Murwillumbah, NSW
- Posts
- 7
Tallow wood
Today I had some huge trees cut down one is a tallow and the other is similar though I don't think it's the same.
I had the straight section of trunk cut to about 5m and have four of those.
I think I would like it milled for use as a deck (bearers and joysts) but unsure whether is suitable and if it can be used green?
Also I'm looking for someone who could mill it in northern NSW?
Couple of pics below. Any help would be appreciated.
First pic is the tallow on the ground , second and third are the tree I'm not sure of
Sent from my iPad using Tapatalk
-
11th October 2014 09:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th October 2014, 08:00 AM #2
-
13th October 2014, 08:02 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Tallow wood is a wonderfully durable timber!
Very resistant to pests,extremely strong and often used in the past, when it was plentiful, for dance floors and external window sills. Tool handles would be a good use for T/wood. I have a mallet with a T/wood handle that is over 50 years old and it was only evr rubbed with BLO. Still in perfect condition.
I like the look of polished t/wood and the fell of the polished timber is hard to match.Gre
Great timber to have and lucky you!!!
-
13th October 2014, 08:23 PM #4
Artme is spot on - very durable. A fairly ordinary looking timber for the most part, but hell strong particularly if quarter sawn. Used for window sills etc. An excellent structural timber.
Very well behaved during drying too - not much bowing/twisting, and not much end checks, particularly if sealed properly.
-
13th October 2014, 09:50 PM #5
Sure you can use it green for a deck.
Green is the only way you'll be able to nail it.
Gee you they only just misted that shed!Steven Thomas
-
13th October 2014, 10:10 PM #6New Member
- Join Date
- Aug 2012
- Location
- Murwillumbah, NSW
- Posts
- 7
Yes I was very lucky they were going to rope then decided not to. Considering all my woodworking gear is in there I'm glad it didn't (they were insured) I have a few sections left over only 1.5m long but 0.9 in diameter we rolled down the hill think I'll drag them back up and save. Thanks for your advice
Sent from my iPad using Tapatalk
-
15th October 2014, 10:00 PM #7
Similar Threads
-
Tallow wood posts
By Justleft in forum TIMBERReplies: 2Last Post: 31st May 2011, 08:42 AM -
Tallow wood
By Jedo_03 in forum TIMBERReplies: 9Last Post: 7th June 2006, 11:05 PM -
Tallow Wood
By Mzad in forum TIMBERReplies: 4Last Post: 15th January 2006, 11:21 AM