Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Camera slider
-
29th October 2014, 10:54 PM #1Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Camera slider
This is my first post on the CNC Machines forum.
Maybe someone could throw some light on Nema 17 stepper motor drivers and power requirements.
I initially started a post over on the Metalwork forum re a camera slider starting with a basic design, and it quickly escalated into something far more sophisticated using a stepper motor.
See here https://www.woodworkforums.com/f65/camera-slider-189538
Any input from this section will be appreciated.
Ken
-
29th October 2014 10:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th October 2014, 12:17 AM #2GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 2,685
First step is to find out what weight the load (camera) is and how fast it needs to move.
This will help choose the correct motor for the job.
Also, ask the mods to move the other thread to the CNC forum and, if possible, merge the two threads.Geoff
The view from home
-
30th October 2014, 02:04 PM #3Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Camera mass and speed etc
Just weighed my camera, and it's about 1.4kg. With big lenses this could be up to 2kg.
The speed along the track is to be variable, but I would say in the range of 1mm per second to 20mm per second.
Ken
-
30th October 2014, 04:25 PM #4Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 79
- Posts
- 2,251
Simple actuator
What I'm trying to achieve for my camera slider can best be demonstrated here
http://www.youtube.com/watch?v=-DBmbtBd6bg
I would like to start with the electronics first as this is my weakest link.
I would like info on the Arduino uno board piggie backed with an adafruit stepper motor controller plus info on powering all this up out in the field, ie, battery powered.
Can you get me started?
Ken
Similar Threads
-
Camera slider
By neksmerj in forum METALWORK FORUMReplies: 57Last Post: 30th December 2014, 03:32 PM -
Slider Length....Can I get away with 2m
By woodman-79 in forum WOODWORK - GENERALReplies: 8Last Post: 23rd July 2012, 11:44 AM -
Drop saw or slider??
By bullethead in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 22nd July 2008, 09:30 AM