Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Craftsman Spindle Update.
-
4th February 2015, 09:29 PM #1Novice
- Join Date
- Dec 2014
- Location
- Queensland
- Posts
- 15
Craftsman Spindle Update.
The spindle is now out of my lathe, removed by using a puller made up form a 6" section of hollow tube and a length of 1/2" threaded rod (as suggested by Mal AMH). (Not having a working lathe, locating a piece of pipe of the correct dimensions was a bit tricky.) The shaft had been damaged from the pulley oil plug being bottomed into the bearing surface. It was VERY difficult to pull the bruised and mildly scored spindle past the pulley and bull gear.
For those who own a Craftsman; you may be interested to know that the spindle is different to the standard roller bearing model. The Craftsman spindle is on the right of the vertical photo and on the top of the horizontal photo. The reason for the difference appears to be due to the need to reposition the back gear to accommodate the under drive spindle V belt.
A local machine shop has indicated that it is a straightforward job to modify a standard roller bearing spindle to fit the Craftsman, as the critical overall dimensions are the same.
Many thanks to those who have offered assistance! ).
Arthur
-
4th February 2015 09:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Hercus Craftsman Spindle Help!
By anj909 in forum THE HERCUS AREAReplies: 2Last Post: 3rd February 2015, 07:54 PM -
Craftsman Metal Lathe Spindle Will Not Turn, Motor and Pulleys do
By MrChips in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 14th June 2009, 07:46 PM -
Bent spindle on craftsman lathe, its a discountinued part
By dirk1609 in forum WOODTURNING - GENERALReplies: 14Last Post: 19th May 2009, 02:01 PM