Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Upgrading from MPC03 to MPC6515
-
23rd March 2015, 08:15 PM #1
Upgrading from MPC03 to MPC6515
Recently I was cornered into upgrading my Laser Engraver, the MPC03 card had failed, I had an upgrade MPC6515 in stock that I had not used; here is my story.
Any useful constructive comments are welcome.
Amos
Part1_Upgrading from MPC03 to MPC6515.zip
Part2_Upgrading from MPC03 to MPC6515.zip
Part3_Upgrading from MPC03 to MPC6515.zipGood, better, best, never let it rest;
Til your good is better, and your
better, best.
-
23rd March 2015 08:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th October 2015, 05:53 PM #2
You are a much braver man than me PenTurner.
I find myself in a somewhat similar situation as I soon need to upgrade the electronics on one of the cheap K40 Chinese lasers to a RDC6442S DSP controller.
The machine as it currently stands would no doubt work wonderfully if the supplied software was any good at all, but it uses MoshiDraw. And that is absolutely the worst piece of excreted garbage that has ever been put on the market. It wouldn't matter so much, but the manufacturers then made it so that the machine required a dongle. To protect what???
Any way, I have now got the new controller card (which cost as much as the whole machine) and as soon as my encasted broken foot repairs itself ( 4 weeks to go), I will start on the upgrade.
Respects for undertaking the job with the small amount of information you had.Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
6th October 2015, 07:21 PM #3Senior Member
- Join Date
- Nov 2008
- Location
- Far North Queensland
- Posts
- 330
You would think something called MoshiDraw would be awesome
Russell.
Similar Threads
-
Upgrading my tools
By chook in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 13th January 2013, 07:03 AM -
Upgrading my Lathe
By Skewturn in forum WOODTURNING - GENERALReplies: 6Last Post: 4th October 2012, 04:04 AM -
Converting MP03 to MPC6515 Laser Engraver
By PenTurner in forum CNC MachinesReplies: 3Last Post: 26th May 2012, 12:30 AM -
Upgrading an OWT.
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 24th June 2011, 07:16 PM -
upgrading.
By toby.1944@hotma in forum COMPUTERSReplies: 2Last Post: 17th August 2010, 11:18 PM