Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
4th May 2015, 02:31 PM #1New Member
- Join Date
- May 2015
- Location
- Warrnambool
- Posts
- 2
Replacement for record 778 fence set
Hi All. New bye here. Can anyone help complete my lovely junk shop 778. Many thanks. Murray. 0408724640Warrnambool Australia
-
4th May 2015 02:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th May 2015, 03:07 PM #2
Hi Murray and welcome.
Ebay is worth keeping an eye on. Other places to try are old tool sellers both here and overseas. You may strike luck and someone has one in his spare bits box. Google can help too.
A couple of old tool sources in Aus.
http://www.hansbrunnertools.com/
http://www.toolexchange.com.au/our-t...rd-planes/8476
The other options are hold out and find another old 778 with a fence or if you have the arm bars you could make a wood fence.
They are a handy plane to have so good luck with the hunt.
Regards
John
-
8th May 2015, 12:35 PM #3New Member
- Join Date
- May 2015
- Location
- Warrnambool
- Posts
- 2
-
8th May 2015, 07:15 PM #4
I was in the same predicament a few years back. I was going to make a wooden fence for my Woden W78. Fortunately Brontehls was able to source a fence that fitted, off a damaged WS A78, so I didn't need to. But from reseach I did at the time:
The rods fitted to a Record 778 are 5/16" diameter, and centred 140mm apart (excuse the mix of metric and imperial). I would suggest you use a piece of hardwood and drill holes 140mm apart, and far enough in from the edge to drill and tap two holes for locking bolts (M4 or M5 threads should do). That should work for a while.
Alternatively glue the rods into the timber fence, and use the locking screws on the 778 body to adjust the fence in and out.
HTH.
Cheers, Vann.Last edited by Vann; 8th May 2015 at 07:17 PM. Reason: wrong furum member mentioned
Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
Similar Threads
-
Record CL5 wood lathe..belt replacement
By Paddy in forum WOODTURNING - GENERALReplies: 3Last Post: 5th September 2011, 02:48 PM -
Incra Original Jig Fence or Woodpeckers LE Fence - which one for newbie?
By pellcorp in forum ROUTING FORUMReplies: 5Last Post: 9th March 2009, 10:52 AM -
Record router plane fence
By Green Woodchips in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 17th August 2006, 11:59 PM -
Replacement Table Saw Fence
By mag in forum TABLE SAWS & COMBINATIONSReplies: 6Last Post: 7th October 2004, 05:57 AM