Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2008
    Location
    Brisbane Australia
    Posts
    26

    Default Hercus Vertical Head.

    Hi Guys.
    Trying to help out a young bloke who has an O mill S/N OLM 528 , came from a school and the vertical head has never been fitted or used, still has packing grease on gear , it has a collet adapter fitted and not having a manual or exploded view am reluctant to get too heavy handed in trying to remove it , am I correct in thinking this adapter is just fitted into the Morse taper and held in place by the draw bar on the collet and should tap out of the Morse taper with draw bar and collet removed or is there some other procedure required ??

    Jim.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2012
    Location
    Griffith NSW
    Posts
    257

    Default

    Your thinking is correct. A bit of 20mm rod down the hole and a gentle tap should see it fall out.

  4. #3
    Join Date
    Oct 2011
    Location
    sydney
    Posts
    880

    Default

    Hi,

    When I got mine it was the same. I gently knocked it out with some bar but I sprayed WD40 or some other lubricant to help release it.

    Ben

  5. #4
    Join Date
    Nov 2005
    Location
    adelaide
    Posts
    667

    Default

    this is what i use for a collet remover bit of toilet roll inner tube filled with lead and a handle attached
    a bit of a tap on the head of the drawer bar and out it comes
    IMG_0544.JPG
    john

  6. #5
    Join Date
    Nov 2008
    Location
    Brisbane Australia
    Posts
    26

    Default

    Thanks for the reply's guys , had to make a support collar and use the press , it was ridiculously tight but all good now.
    Jim.

Similar Threads

  1. Hercus Model O Vertical Head Clearance
    By gdonald in forum THE HERCUS AREA
    Replies: 14
    Last Post: 16th June 2014, 08:45 AM
  2. Vertical Milling Head for Horizontal Mill
    By seafurymike in forum METALWORK FORUM
    Replies: 42
    Last Post: 16th May 2012, 05:23 PM
  3. Hercus Vertical Milling Attachment
    By Rodd Perrin in forum THE HERCUS AREA
    Replies: 9
    Last Post: 1st November 2011, 09:33 AM
  4. What's in a vertical head?
    By neksmerj in forum METALWORK FORUM
    Replies: 25
    Last Post: 19th April 2011, 05:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •