Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Box Joint jig
-
23rd June 2015, 02:49 PM #1SENIOR MEMBER
- Join Date
- May 2010
- Location
- Bendigo
- Posts
- 776
Box Joint jig
Well, it took a while to get started, but after seeing Ed Stiles finger joint jig on youtube I just had to have a go, not to say that $5 piece of 19mm ply I rescued at the recycle centre (love that place)
I made a few minor modifications, namely the side pieces to give the jig more stability. I figured the minor loss of carriage movement was worth that after my cross cut sled warped slightly, enough to throw out box mitres a fraction.
The one problem I faced was that the new saw blade I bought and had modified to flat top profile was just a whisker over the 1/8th inch, about 1/128 in fact. That meant that the last cut had to be 1 and ¾ turn, so for a ¼ cut I do the first cut then advance 1 and ¾. That makes for a snug join, eminently ‘glueable.’ I reckon I’ll do what Matthias Wandel did recently and start off with a bunch of little boxes for screws and such, then progress to decorative stuff after I have developed some skill.
box joint jig.JPGbox joint jig positive stop mech.JPGBox joint jig winding mech.JPG
-
23rd June 2015 02:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th June 2015, 02:37 PM #2
That looks like a nicely finished jig. I must have a look at the vid you refer to as making one that uses a single blade is something I am wanting to do in the not too distant future.
Thanks for showing us.Dallas
-
29th June 2015, 01:03 AM #3SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Here is another idea for a single blade jig.
http://www.thewoodfather.com/project...int-jig-plans/
Similar Threads
-
What is this joint!?
By Jovian in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 9Last Post: 1st August 2012, 04:16 PM -
8 Way Joint
By BozInOz in forum WOODWORK - GENERALReplies: 3Last Post: 15th May 2008, 08:06 PM -
Mitre joint with biscuit joint
By hsc07ww in forum WOODWORK - GENERALReplies: 4Last Post: 30th November 2006, 10:10 AM