Jorgensen clamps

[Lappa]

Hoping someone can help. Searching has failed to find these clamps for sale in Australia or eBay. Does anyone know if they are available in Australia. There is a similar clamp from Dawn but the bolt goes through a hole in the base rather than slide in a slot. It needs to be able to clamp at least 125mm.
Picture of the wanted clamp below.

image.jpg
Thanks in advance.

[aldav]

McJing has something similar to this but like the Jorgensen one it only clamps 3". https://mcjing.com.au/categorybrowse...ookieSupport=1
All the others I can find seem to require dog holes.

Cheers,
David

[aldav]

These Irwin Record ones look good. Don't hold your breath while you look at the price though, you might never breathe again!
http://www.gettoolsdirect.com.au/irw...FUpvvAodwfUJ4A

[Lappa]

These Irwin Record ones look good. Don't hold your breath while you look at the price though, you might never breathe again!
http://www.gettoolsdirect.com.au/irw...FUpvvAodwfUJ4A

Had the same problem with the Dawn ones
http://www.thewoodworks.com.au/index...nufacturer_id=

[lesmeyer]

I saw the exact same clamp (different colour) to the one you are looking for.
Carbatec Perth have then on special for $29. (code HC120). They have max 120 mm clamp range unless you mount a space under it.
Les