Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 17
-
28th September 2015, 02:32 PM #1SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
Anyone make Rings & Ring boxes - i.e. engagement ring?
Hi all,
Does anyone make ( or know of anyone ) rings, engagement rings + boxes? In Melbourne?
Preferably someone who holds stock ( i need one fairly quickly ).
Anyone?
cheers
Seb
-
28th September 2015 02:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th September 2015, 07:34 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
Try contacting one of the local lapidary or silversmithing clubs. There are plenty of people who make this sort of stuff all the time. Check them out on Google. Good luck, it sounds like you're on a mission.
-
28th September 2015, 09:58 PM #3SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
I was actually looking for a wooden ring. Something as pictured below.
This will be used during a ( yes, a proposal! ). She will likely want to pick her own 'real' ring, so i haven't go that yet, but I want to have something substantial, and worth keeping as a momento of the actual event too, so that I have it on the day ( which is going to be very soon! )
I've already found a nice timber ring box, so that's sorted. Now for a ring!
example of the kind of thing i'm thinking:
-
29th September 2015, 04:08 PM #4rrich Guest
I know a lady in Camden, South Carolina, USA that makes small boxes. I gave my wife a ring in one of her boxes.
It's just a box, nothing else. No velvet insert. I wrapped the ring in some tissue paper.
The boxes are made to order and no stock on hand.
If you want further details send me an E-Mail at richflynn at yahoo dot com
-
29th September 2015, 04:32 PM #5SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
thanks Rich,
Have actually got a nice box sorted already.
I'm going to have a go at making a ring myself tonight. I have all the equipment I need, but have never made one before. By all accounts, it doesn't actually look that hard to do, so will post here if I manage to pull it off!!
-
5th October 2015, 01:42 PM #6SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
Well, for those interested. I never was able to find anywhere that made rings.....but necessity breeds innovation and I managed to make it myself. Must have done an OK job as she said yes! . We'll have to go shopping for a 'real' one, but at least we have something nice and genuine to remember the day.
Also my first time on the lathe, so pretty happy! Presented in a Conkerberry & Ebony box as per the one in below pic . The stone inlay is Lapis Lazuli.
ring.jpg
flip_top_ring_box_2_1024x1024.jpg
-
5th October 2015, 07:19 PM #7
-
5th October 2015, 08:53 PM #8GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Can you tell us how you made it. I thought that timber that fine would be prone to simply breaking up when it comes in for a bit of hard wear ?
Is there a trick to making it tough?
Cheers
Arron
-
5th October 2015, 09:47 PM #9SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
It's made out of Jarrah. I used the drill press with a hole saw to partly drill the outer ring, then as 16mm forstner bit to drill out the inside. Then finished off the outer hole. Then carefully sanded it down on the belt sander to get the width.
Then made a tapered spindle on the lathe, and put the ring on it. shaved it down to final thickness, bit of a bevel either end, and cut a groove in the middle of it.
Then added powdered/pulverised lapis lazuli stone into the groove along with superglue ( use gloves! ). then back on the lathe to grind/sand the stone flush.
After that, sanded through the grits to 600 ( wet ). added a bit of finish + some wax and then sanded the inside by hand, and just put wax on the inside.
as for strength, it is pretty strong, but i guess if you really tried you could break it.......but then, you can do that with other types of jewellery as well. I think the stone + superglue would probably strengthen it a little as well! I should try a test on some test rings.
-
6th October 2015, 05:24 AM #10GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Thanks very much. Goes in my list of things to try one day.
cheers
Arron
-
6th October 2015, 05:37 AM #11GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Also. Can you tell us where you bought the lapis lazuli powder. A quick Google finds a few places to buy it online but I assume you bought it over the counter?
-
6th October 2015, 07:04 AM #12SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
I just bought a Lapis Lazuli rock from one of those "Spiritual Crystal" type shops. It was about $8.00. Then, using my trusty Sledgehammer......it quickly became powder
-
7th October 2015, 08:04 PM #13
Congratulations and well done.
I think a personalized made gift is worth more than an overpriced store bought token (ring).
-
8th October 2015, 05:59 PM #14
Well done on the ring.
I am just thinking of the conversation that you had with the person over the counter.
Sebastiaan76; "Does this rock crush well?"
Counter Person; "I am sorry I do not understand."
Sebastiaan76; "Can I make this into powder if I hit it with a hammer?"
Counter Person; "It is not for consumption. It is to enlighten your life."
Sebastiaan76; "No worries. I will take it and if it does not crush well can I bring it back?"
-
8th October 2015, 06:32 PM #15SENIOR MEMBER
- Join Date
- Oct 2013
- Location
- Altona North, Melbourne VIC
- Posts
- 223
hahaha. Close. They told me to charge it under a full moon to give it the most energy.
I charged it under a full sledge hammer instead.
I like my way better
Similar Threads
-
30-06 key ring Pen
By gawdelpus in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 5th May 2013, 01:08 AM -
Engagement Ring Box?
By woodlogic in forum TIMBERReplies: 0Last Post: 7th August 2012, 08:01 PM -
Two Cuff link or Ring Boxes
By LGS in forum WOODWORK PICSReplies: 2Last Post: 6th July 2012, 10:18 PM -
Ring box
By AlexS in forum BOX MAKINGReplies: 14Last Post: 30th October 2008, 03:37 AM -
Ring Rolls For Boxes
By Boxinator in forum BOX MAKINGReplies: 26Last Post: 29th January 2007, 08:07 PM