Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
-
30th December 2005, 11:59 PM #1
Random Orbital Sanders - comparisons
I'm seeking some viewpoints on a couple of random orbital sanders...basically which one to get.
Any opinions regarding the Metabo SXE 450 Duo and the Bosch GEX 150AC would be kindly appreciated.
Cheers everyone and have a safe festive season.
SmedOlder, Wiser & Still Learning
-
30th December 2005 11:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st December 2005, 12:04 AM #2Member
- Join Date
- Apr 2005
- Location
- Perth
- Age
- 56
- Posts
- 89
Hi ya smed,
I have the Metabo duo and think it is great. Have had mine for over two years now very happy. I don't notice any vibration or get sore in the hands, wrists or arms after some pretty heavy sesions with it.
Would buy another one if I had to do it again.
Buz.
-
31st December 2005, 12:11 AM #3
Cheers Buz, I liked the feel of the Metabo when I went window shopping today. It's a heavier unit than the Bosch which should save some effort. How's the dust extraction on your Metabo?
SmedOlder, Wiser & Still Learning
-
31st December 2005, 12:15 AM #4
Have a look at the new makita BO6040, I've just spent 3 days using one, after using it I have realised it has in one fell swoop made obsolete, my hugeass makita belt sander, the Bosch pex 400, and any other RAS in the shed. Unbelieveable power (750watt) adjustable speeds and orbits, cannot be stopped. Makes really light work of big tasks, maybe a bit on the heavy(weight wise) side for finer work though.
Basically a brilliant piece of gear cost $550 (it's not mine, on loan from a mate, but by crikey ebay may see my belt sander soon ).Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
31st December 2005, 12:24 AM #5GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
Take a look at this http://www.triton.com.au/images/productspecs/TROS.pdf
It has a few good features unique to Triton. I don't know when it will be available in the shops but hopefully it will be soon at a good price.
-
31st December 2005, 12:36 AM #6
I like the look (the body configuration) of the Mak, but it's out of the price range, so I'm stepping back down out of necessity to probably the Metabo, Bosch or maybe the Makita 6030.
But hey Bruce, hang on to that Mak belt sander ... they're just awesome machines..can't ever seem to kill mine...even after it did take a hike down the driveway once (yeah, I was too impatient to let the thing stop before I put it down). Have you tried clamping it on its side...works a treat and great for taming the beast! Which does lead me to a sub question regarding the random orbitals...which gives the better final finishing sands?
Cheers
SmedOlder, Wiser & Still Learning
-
31st December 2005, 05:08 AM #7Senior Member
- Join Date
- Apr 2004
- Location
- United States
- Posts
- 317
If you have a compressor with enough cfm output, consider pneumatic's. A shop I do work through has 2 Souix pneumatic ROS and they are great. They've been going for about 5-8 hours every day for the last 2 years and the only thing that's been done to them is replacing the hook&loop pad on them after the first year or so. They can sand so much more area is so little time compared to any electric unit I've tried. These particular ones do not have dust collectors on them so that's a negative, but the sanding is incredible.
Paul
-
31st December 2005, 05:23 AM #8Intermediate Member
- Join Date
- Dec 2005
- Location
- Perth, Australia
- Age
- 45
- Posts
- 33
hi SMED
i've got the Bosch GEX 150 and it's a solid unit. No probs sanding smallish burls etc.
the only beef i have with it is the non standard dust extraction port that it has. It's got its own dust filter (a rectangular shape) which is next to useless and i cant fit a vaccuum hose onto it because of hte shape.
So now i usually sand in the my backyard so not much a problem.
I'm also looking at the Makita belt sanders for some heavy work but we'll see how that goes.
good luck with your purchase.
cheers
Jeelan
-
31st December 2005, 06:24 AM #9Originally Posted by Solaris
Failing that adapt a piece of bike innertube to join rectangular to round.Stupidity kills. Absolute stupidity kills absolutely.
-
31st December 2005, 08:30 AM #10
I have the Metabo Duo. Only just got it, but used it for about three hours one day and am completely satisfied. Especially like the dust extraction. Just stuck a standard hose from the shop vac into the round port, and it picked up almost all the dust. Very impressive.
Tex
-
31st December 2005, 10:08 AM #11
Yep the metabo is a good machine, I give my a good cane'in all the time.
hcbph you need a compressor of at least 20cfm to run a windy tool(ruples)with a huge tank(at least 200ltrs)any thing less will not keep up on continous use, you got to think a electric sander uses about 700watts... and a 10hp 3ph compressor uses more power than most would care too afford.....................................................................
-
31st December 2005, 10:44 AM #12
The Metabo Duo rocks, it compares well to the Festo equivalent and the price tag (around $265) makes it great value. I was intrigued by talk of the gigantic Fein, but that's currently out of reach.
Bruce, how does the big Makita ROS go with regard to flattening? I always go the beltie to take down high spots before I hit it with the orbital. I figure the "longer bed" of the BS will bridge the humps instead of riding them, sort of a jointer vs. smoother thing. Seems to work, but anything that cuts down sanding is worth a try IMO.
Regards,
Rusty.The perfect is the enemy of the good.
-
31st December 2005, 11:15 AM #13
Thanks for the input on the ROS to all those that have replied. I suppose I should ask about the Makita 6030 ... any happy buyers out there?
SmedOlder, Wiser & Still Learning
-
31st December 2005, 12:30 PM #14
The Makitas are all solid performers, that may not be the absolute best, will always be in the top 5, can only speak for the 6040 and the older orbitals, not the 6030.
Rusty, I achieved better and truer flattening with the big ROS than my belt sander this time the belt left too many "divets which had to be removed with Ras, then again I was under duress at the time 39 degree heat dust and a strict time frame. So IMO if used in conjuction the pair would give the best results, but the Big Mak ROS certainly can remove material in a fair hurry when needed, then change paper and settings to finish off.Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
31st December 2005, 01:54 PM #15
I have the Metabo which I think is a fantastic piece of work. I connect it to my shop vac and sanding in my workshop is completely dust free.
Similar Threads
-
Random Orbital question
By craigb in forum HAND TOOLS - POWEREDReplies: 18Last Post: 25th April 2007, 12:03 PM -
random orbital sander
By spitnchips in forum HAND TOOLS - POWEREDReplies: 25Last Post: 30th August 2005, 08:34 PM -
Disappointed with random orbital sanders performance.
By Daniel in forum HAND TOOLS - POWEREDReplies: 12Last Post: 9th August 2003, 10:50 PM -
Looking at random orbital sanders
By Eastie in forum HAND TOOLS - POWEREDReplies: 15Last Post: 8th July 2003, 06:09 PM -
Orbital and Band sanders
By hoarenet in forum FLOORING, DECKING, STUMPS, etc.Replies: 10Last Post: 23rd June 2003, 02:44 AM