Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2003
    Location
    Perth
    Posts
    52

    Default fixing timber door frame to external double brick wall

    Hello,
    I'm about to remove a window from and external double brick wall and replace it with a timber door frame. It will eventually accomodate 2 doors. My problem is how to fix the door frame and hide the holes required to hole it in place. I'm using jarrah 180x40mm and will be puting a clear varnish on. Therefore I can't make big holes for dyna bolts or coach screws as the holes can't be easily covered. I was hoping a few 100mm nailes into plastic spagetti or something like that. Placky and paint would be a good solution but I want it left so the natural grain is visible. I presume fixing will be required both sides of the cavity.

    Any help would be appreciated.

    Regards
    Greg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395

    Default

    There are a few methods you could use Greg.
    Fixing to the inside skin will be sufficient.
    Either spag.into the ends of the bricks or timber wedges in the mortar joint. 3 or better still 4 either side.
    An alternative although harder to execute is to toothe out the mortar joints both sides, fit brick ties to the jamb & slide it in. Inject chemset or similar & then repoint the joint on the internal face.
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

  4. #3
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Greg,
    gauge a line on the jamb the depth of the door (ie: where the back of the door will end) this is where the door stop will sit if it's a seperate component. If you're using say 30 x 12 you've got 30mm in which to place your fixings so that they will be hidden by the stop. If it's a one piece jamb and stop then you'll need to counterbore your fixings and get yourself a plug cutter to make some plugs to fill the counterbores with. Once glued in place with the grain orientated you'll hardly see them.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

Similar Threads

  1. Floor Tile Removal
    By Stu in forum FLOORING
    Replies: 8
    Last Post: 7th July 2005, 11:08 PM
  2. Wall design - brick & timber
    By onholidays in forum BRICKWORK
    Replies: 4
    Last Post: 1st February 2005, 02:48 PM
  3. Timber for dor in garden wall
    By S601C in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 20th August 2004, 01:23 PM
  4. Fixing diagonal timber braces to concrete stumps?
    By Eastie in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 16
    Last Post: 9th May 2004, 10:35 PM
  5. Laminating external timber columns
    By Fred in forum WOODWORK - GENERAL
    Replies: 1
    Last Post: 23rd January 2004, 08:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •