Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Jul 2006
    Location
    Bundaberg, Australia
    Posts
    4

    Default Refinishing an old solid timber wardrobe HELP!

    Hi all,

    This is my first post so please be kind...

    I am restoring an old solid timber wardrobe which was my fathers.
    (he used to use it to house his garden implements...)
    It is solid wood....could be oak or someone said teak? It is HEAVY
    (i will post pics) it is a beautiful golden colour
    The back is tongue and groove and so is the floor...
    I have sanded some of it but it has some warping in the solid timber doors.
    It lived in a shed and has water stains down the doors and some serious water damage to the top....
    Any tips on restoring it? how do i straighten the doors?

    Thanks for your help

    Andrew

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    You sure it's solid and not veneer over solid timber or core stock. If it has any figured grain it is just about guaranteed to be veneered as most good figured timber was too highly prized to make a wardrobe out of even in Victorian times.

    This could also account for the warping. On a really good wardrobe it is often hard to see if it is solid timber or not.

    Post some pics and it will help.

    Cheers - Neil
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  4. #3
    Join Date
    Jul 2006
    Location
    Bundaberg, Australia
    Posts
    4

    Default Yep it's solid timber

    It is actually from Geelong as that is where i used to live,
    And my dad used to live in Newtown too (then Highton then Grovedale)

    Anyway.....
    It is SOLID timber!
    Made of about 8 inch boards joined together.
    One of the centre boards is a foot wide.
    The doors are 2 and a half boards wide and have some timber supports on the back of them. These have oval holes to allow movement of the timber.
    The door had pulled away from these....

    I will post pics when my camera charges up.

    Thanks
    Andrew

  5. #4
    Join Date
    Jun 2004
    Location
    Port Sorell, TAS
    Age
    58
    Posts
    1,633

    Default

    Welcome to the funnyfarm mate!

    If you're lucky it maght have been finished in shellac. Get some meths and a bit of steel wool, or a rag, and have a rub at it. If shellac, this will either liven the finish up with a light rub, or easily strip it off ready for a new one. If you are careful you will be able to leave most of the 'patina'. If the timber is waterstained you might have to go back to the fresh timber.

    Den
    The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde

    .....so go4it people!

  6. #5
    Join Date
    Jul 2006
    Location
    Bundaberg, Australia
    Posts
    4

    Default Here is a pic or 2 of the timber....also how to re-finish?

    Any hints on unwarping this vintage timber?
    This is the door. i have sanded nearly all the watermarks off...
    Attachment 25891
    And another panel that goes between the doors.
    Attachment 25892

    What kind of timber is it?
    Also any ideas on how to re-finish? oil? clear laquer?
    Thanks
    Andrew

  7. #6
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    533

    Default

    Looks like oak to me. Shellac and wax is an easy to apply and natural finish. Oiling can be dodgy, esecially in old dry timber (can soak it up and go very dark). Lacquer requires a spray gun.

    Furniture restoration books are full of full of advice on how to dewarp timber, but my own experience is it's often impossible on very old pieces. Something that has taken on a new shape over decades won't revert to flat in a hurry if at all. Some kind of bracing can counter the warp though. This means attaching sections of wood that pull against the warp. Cutting grooves into the wood at right angles to the warp and inserting slivers of wood slightly narrower than the grooves can also work, but is not easy to do.
    Rusty

  8. #7
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    From the pics it definitely doesn't look like oak, I would be more inclined to go with the teak guess of someone, but without seeing it in the flesh so to speak it 's a little bit hard.

    This photo is typical of oak grain


    Looks more like a eucalypt


    Or teak below

  9. #8
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    6,518

    Default

    I have some oak at home (veneer) that looks like the bears bottom pic, the medulary rays are there in a fairly straight grain but not overly pronounced.
    Not wishing to start a shyte fyte but just comparing to what I have on hand.
    Stupidity kills. Absolute stupidity kills absolutely.

  10. #9
    Join Date
    Jul 2006
    Location
    Bundaberg, Australia
    Posts
    4

    Question Thanks for the wood info, here are a few pics of the wood with shellac

    Hi there, i sanded and sanded and sanded.....
    I then got some shellac (orange) and rubbed it in....

    It does have the colour of the teak in your pic ubeaut.
    It has a few burls is this consistent with teak?
    Here is the result...with only 2 coats....

    Attachment 25993

    Attachment 25994

    The wood is beautiful golden colour in the light...
    (Just seeing it glow in the light is awesome, I love working with good wood!)
    Thanks all, any more tips?
    Especially with re-doweling?
    I dont need a seeing eye dog, i need a thinking brain dog
    Andrew

Similar Threads

  1. Turning SOLID TIMBER Drum Shells
    By jon46089 in forum WOODTURNING - GENERAL
    Replies: 36
    Last Post: 28th February 2009, 07:45 PM
  2. Floating Vs Solid Timber floor. ( A newbie)
    By actUser in forum TIMBER
    Replies: 17
    Last Post: 4th January 2006, 10:30 PM
  3. Paint v's epoxy
    By Hartley18 in forum BOAT BUILDING / REPAIRING
    Replies: 14
    Last Post: 4th May 2005, 12:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •