Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2007
    Location
    Adelaide
    Posts
    275

    Default Fixing Villaboard to Masonary wall in Bathroom

    I am planning the renovation of our bathroom and that includes closing off a window and other large opening in one of the walls. I thought the easy way would be to just put villaboard over the entire wall (4.2m long x 3.4m high) rather than bricking and plastering.
    Will I need to put up a frame on the wall to fix the board to or can I adhere the board direct to the wall and just put a support frame in the openings I am closing? I intend to tile to 2.0 m
    Is there likely to be any problem where the villaboard meets the 2 end walls?

    Regards
    Juan

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2007
    Location
    Adelaide
    Posts
    275

    Default Fixing Villaboard to masonary walls

    Delete all reference.
    I have spoken to James Hardie Customer support and they do not approve the direct adhesion of villaboard to masonary walls.
    Cheers
    Juan

  4. #3
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    But you shouldn't need a full frame ... just screw some battens to the bricks and then attach the villaboard to that? Plaster would be even easier if it's isn't in the shower recess.

  5. #4
    Join Date
    Jul 2004
    Location
    ipswich Queensland (Gods backyard)
    Age
    69
    Posts
    337

    Default

    Quote Originally Posted by juan View Post
    Delete all reference.
    I have spoken to James Hardie Customer support and they do not approve the direct adhesion of villaboard to masonary walls.
    Cheers
    Juan
    that surprises me as thats exactly what they do in high rises ,using dobs of adhesive on the block walls and appling sheets directly ,they also use a long straight edge to push the sheet into the adhesive to keep the sheet flat
    kind regards
    tom armstrong
    www.kitcheninabox.com.au
    Flat Packed kitchens to the world

  6. #5
    Join Date
    Dec 2005
    Location
    Gold Coast
    Age
    66
    Posts
    1,083

    Default

    We've recently done this (villaboard to masonry). According to a friend who's a tiler, if you don't want to use battens, you can join it to a(straight) wall with a series of screws in wall plugs (or spaghetti). Basically you should use as many as you would nails in battens.

    I did this, and recessed the heads by lightly and partially pre-drilling with a large diameter drill bit, then drilling through this with the masonry drill bit (say 5mm). Whack a plug in, tap it into the masonry, and then insert a screw.

    If you want to tile over it, or just make sure it's waterproof, buy some of the blue under-tile preparation and paint over it.

    The reason you can't glue it (with stud adhesive, cornice cement and so on) is that water from the bathroom penetrates the porous villaboard and detaches the glue. Good luck with it mate.

  7. #6
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    12,881

    Default

    I just lifted this straight out of the 20 page Installation Brochure....
    You can download the brochure from the Hardy's website

    MASONRY/CONCRETE/AAC
    Always ensure the substrate is given adequate time to dry out before
    installation of Villaboard lining. The wall surface must be clean, dry and
    free of any material that will reduce an effective bond (e.g. dust, loose
    paint, oil, drummy render, waterproofing or other agents, etc).
    Chase walls, install services and secure to wall prior to fixing
    Villaboard lining.
    MASONRY/CONCRETE/AAC TOLERANCES
    Cut Villaboard lining approximately 15mm less than floor to ceiling height
    to allow for building tolerances. Ensure a 5-10mm building tolerance gap
    is provided at the floor and ceiling junctions with the Villaboard lining. See
    Page 10 for specific substrate requirements.
    FIXING TO MASONRY/CONCRETE/AAC
    Villaboard lining can be installed over masonry, concrete and Aerated
    Autoclaved Cement (AAC) substrates by following the requirements in
    Table 5 below.
    TABLE 5
    FIXING METHOD SELECTION
    METHOD ____________ SUBSTRATE _________________ APPLICATION
    Batten/furring channels _ Masonry/concrete AAC blocks _ Tiled/untiled wet/dry areas with flat or uneven substrate.
    AAC fixing ____________ AAC ______________________ Untiled wet/dry areas.
    AUTOCLAVED AERATED CONCRETE (AAC)
    NOTE:
    Not suitable for tiled applications.
    1. Chase walls, install and secure services.
    2. Install Villaboard lining, abutting edges of adjacent sheets.
    3. Drive the AAC fasteners through the Villaboard lining into the wall
    until the fastener head is neatly bedded below the Villaboard lining
    surface.
    4. Only for standard grade AAC blocks of 500kg per cubic metre density.

    NOTE
    Use only suitable fasteners recommended by AAC manufacturer for fixing
    Villaboard lining.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  8. #7
    Join Date
    Dec 2005
    Location
    Gold Coast
    Age
    66
    Posts
    1,083

    Default

    Quote Originally Posted by Cliff Rogers View Post
    I just lifted this straight out of the 20 page Installation Brochure....
    You can download the brochure from the Hardy's website

    MASONRY/CONCRETE/AAC
    Always ensure the substrate is given adequate time to dry out before
    installation of Villaboard lining. The wall surface must be clean, dry and
    free of any material that will reduce an effective bond (e.g. dust, loose
    paint, oil, drummy render, waterproofing or other agents, etc).
    Chase walls, install services and secure to wall prior to fixing
    Villaboard lining.
    MASONRY/CONCRETE/AAC TOLERANCES
    Cut Villaboard lining approximately 15mm less than floor to ceiling height
    to allow for building tolerances. Ensure a 5-10mm building tolerance gap
    is provided at the floor and ceiling junctions with the Villaboard lining. See
    Page 10 for specific substrate requirements.


    FIXING TO MASONRY/CONCRETE/AAC
    Villaboard lining can be installed over masonry, concrete and Aerated
    Autoclaved Cement (AAC) substrates by following the requirements in
    Table 5 below.
    TABLE 5
    FIXING METHOD SELECTION
    METHOD ____________ SUBSTRATE _________________ APPLICATION
    Batten/furring channels _ Masonry/concrete AAC blocks _ Tiled/untiled wet/dry areas with flat or uneven substrate.
    AAC fixing ____________ AAC ______________________ Untiled wet/dry areas.


    AUTOCLAVED AERATED CONCRETE (AAC)


    NOTE:
    Not suitable for tiled applications.
    1. Chase walls, install and secure services.
    2. Install Villaboard lining, abutting edges of adjacent sheets.
    3. Drive the AAC fasteners through the Villaboard lining into the wall
    until the fastener head is neatly bedded below the Villaboard lining
    surface.
    4. Only for standard grade AAC blocks of 500kg per cubic metre density.
    NOTE
    Use only suitable fasteners recommended by AAC manufacturer for fixing
    Villaboard lining.



    Or you can just do it ....

Similar Threads

  1. Fixing timber panelling to wall
    By tgbrooks in forum PAINTING, PLASTERING, TILING, DECORATING, etc.
    Replies: 1
    Last Post: 18th March 2007, 01:32 PM
  2. fixing timber door frame to external double brick wall
    By gmcginty in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 6th May 2006, 12:06 AM
  3. Fixing Villaboard to brick wall
    By Arron in forum PLASTERING
    Replies: 6
    Last Post: 5th July 2005, 09:31 PM
  4. Replies: 1
    Last Post: 4th May 2005, 11:51 AM
  5. Fixing a water pipe in wall
    By Arron in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 28th September 2003, 10:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •