Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 31 of 31
Thread: Brivis Ducted heating problem
-
28th April 2008, 10:17 PM #31
I had a problem with the pilot light not staying on. The pilot would light but as soon as you release the pilot button it would go out. Mine is a Brivis Buffalo 85 central heating unit. Following everyones advice (thanks!), I went and bought a thermocouple and my heater now works. I got a Brivis Thermocouple (part B009065) from Totaline, Roden St in West Melbourne. I could have got a Honeywell equivalent from Reece but I decided to get the Brivis branded one. I probably got touched in the process at $50. I installed it myself by removing the whole pilot assemby which involved the capillary tube fitting and pilot gas pipe fitting and one screw on the pilot assembly. I then yanked out the thermocouple with a pair of pliers then pushed in the new thermocoupling by hand. I then loosely refitted the pilot unit, the pilot gas pipe and the new capillary tube taking care to not cross threads which is dead easy to do. Then tightened everything and tested for leaks with soapy water. Then started it up and it worked just like a bought one!
-
28th April 2008 10:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
shellac problem ?
By la Huerta in forum FINISHINGReplies: 13Last Post: 31st July 2007, 08:00 PM -
Eureka - dust exraction problem solved!!
By bob.jager in forum TRITON / GMCReplies: 8Last Post: 15th September 2002, 11:17 PM -
Triton 2000 workcentre guard problem
By damai in forum TRITON / GMCReplies: 2Last Post: 4th December 2001, 03:28 PM