Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 13 of 13
  1. #1
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default Bleaching Timber

    What is the strongest safe bleach to use. ?
    Regards, Bob Thomas

    www.wombatsawmill.com

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Hi Bob,

    Dont think theres such a thing as a strong safe bleach.
    depends on what you want to bleach and how white you want it.

    Interesting point though.

    sometimes we grab what we're used to without thinking about it.
    lemon juice bleaches, as does wee and i suppose these are safe.
    try lemon juice (or the other) and put it in the sun and see what happens.
    women all over the world put their washing in the sun to bleach it.

    as to the others in decending order, and i know someone will nit pick
    Nappy san
    household bleach(white king)
    oxalic acid
    peroxide
    peroxide with amonia
    lime
    all of the above increase power in sunlight.

    General warning to readers re safty applies

    Astrid

  4. #3
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Thanks Astrid,
    what I'm really wondering is,
    can I bleach a very light coloured wood such as macrocarpra to snow white?
    Regards, Bob Thomas

    www.wombatsawmill.com

  5. #4
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Dont know what timber that is,
    Just experiment on offcut bits and see what happens.

    Astrid

  6. #5
    Join Date
    Apr 2005
    Location
    Nerang Queensland
    Age
    66
    Posts
    10,766

    Default

    I've used household bleach and straight pool chlorine. Both work, but it did affect the outer fibres of the wood, not just the colour.
    Neil
    ____________________________________________
    Every day presents an opportunity to learn something new

  7. #6
    Join Date
    Jun 2007
    Location
    Longreach
    Age
    58
    Posts
    1,108

    Default

    I once bleached some old red cedar with cloudy amonia. It took it from deep red to an orange brown colour, very nice. It seemed to go deeper than the top layer.

    Robert
    Check my facebook:rhbtimber

  8. #7
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Bob,
    you'll probably need to suck it and see. One thing though, oxalic acid tends to turn stuff a horrible yellow colour if applied too long or at too high a concentration.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  9. #8
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    Bob, what are you trying to achieve?

    If you are going to keep the timber raw and bleached, then use a normal chlorine bleach and a scrubbing brush after exposing it all to sunlight. This will chew out the outer fibres of the timber, as will any other bleach.

    Remember how the old boiler stick used to wear away on your mum's washing "copper"?

    If you are going to clear coat, there's a good reason to use a limewash or liming stain instead of a true bleach. In a real mix, there's a bit of bleach but not much, you paint it on, then wipe it off like a stain. That'll impart a bleached look, which can then be oiled or poly'd or whatever, and won't break down the timber.

    Cheers,

    P

  10. #9
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Just a furniture piece I've been thinking about for a while.
    Bleaching and liming might be the go to get a snow white finish, though for a creamy white finish, bleach alone (or even nothing for a darker cream ) would do.
    Regards, Bob Thomas

    www.wombatsawmill.com

  11. #10
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    6,908

    Default

    What if you use one of those milk paints worked into the grain then wiped off, using a wood like tas oak if you sand it evenly with a coarse paper(say120~180g) with the grain it'll give the paint more area to bind into.
    ....................................................................

  12. #11
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Bob, from all of these replies seems you can bleach the timber and wreck the grain, or keep the grain and compromise on the colour .I'd go for the grain,
    If the timber is unusual in itself why spoil it by making it something it was never meant to be,
    I have a philosophy with timber, that is you can tweak the tone but not change the colour without it resisting,
    Ive changed ash to mahogany or pine to cedar at clients requests and it never looks quite rightIMHO.

    Astrid

  13. #12
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    I want to mix it up with some redgum and end up with a nice red and white piece.
    Regards, Bob Thomas

    www.wombatsawmill.com

  14. #13
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Not having seen the timbers you are using, i think that the paler timber will look whiter contrasted against the redgum anyway.
    The eye is always drawn to the darker timber,
    If you try to make the pale timber paler, it might just draw the eye to it which is not what you want,
    this is hard to explain,

    Astrid

Similar Threads

  1. Bleaching yew
    By myles in forum FINISHING
    Replies: 6
    Last Post: 19th November 2022, 09:38 PM
  2. Bleaching timber advice?
    By TimberNut in forum WOODWORK - GENERAL
    Replies: 13
    Last Post: 5th June 2009, 03:06 PM
  3. bleaching oregon
    By la Huerta in forum FINISHING
    Replies: 12
    Last Post: 20th September 2006, 12:53 AM
  4. Bleaching timber
    By Neil Schulz in forum FINISHING
    Replies: 1
    Last Post: 12th June 2002, 01:12 AM
  5. Bleaching Wood
    By Island Ape in forum WOODTURNING - GENERAL
    Replies: 3
    Last Post: 31st January 2001, 07:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •