Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 24
  1. #1
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default 25mm / 1" poly fittings - how do i....

    Ok,

    I have a 1" ball valve & poly elbow fitting. I want to be able to attach the elbow fitting so that when it is tight it makes a left turn (see picture below).



    The only problem is that every time I attach the elbow and tighten it, it ends up facing upwards (again see below).


    Now there must be a really easy solution that I am overlooking, or do I apply massive amounts of thread tape so that it wont tighten as much?

    Thanks!
    Aaron

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    85
    Posts
    3,737

    Default

    Get a 1" lock nut and put it on the elbow and tighten it up against the ball valve.

    Once you put it into the pipe line it shouldn't do that anyway.

  4. #3
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    620

    Default

    With poly fitting, you do need more thread tape. I normally use about 20-30 laps depending on the fitting.

    Leave the first couple of threads relatively free of tape ( 1-5 laps) and put the tape on so that i forms a kind of cone shape, ie thicker at the back than front.

    When you tighten the fitting shouldn't be able to go all the way to the end of the threads. just stop turning when you get to the position you need and you feel its grabbed enough.

    Plastic fittings sometimes flex and leak under pressure that is why i always use more thread tape, on brass you only need about 10 laps.
    If you dont play it, it's not an instrument!

  5. #4
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    52
    Posts
    1,938

    Default

    I'm with bricks ... use more thread tape and wrap it in the cone shape.

    I just did exactly the same thing on a tank a couple of weeks ago. The first time i put it on there wasn't quite enough tape on and there was a very small leak. I pulled the fitting off and applied more tape. Leak gone.
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  6. #5
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default

    Quote Originally Posted by Barry_White View Post
    Get a 1" lock nut and put it on the elbow and tighten it up against the ball valve.

    Once you put it into the pipe line it shouldn't do that anyway.
    Ok thanks I never thought of a lock nut.

    I don't quite get what you mean about once in the pipe it shouldn't do that?, I have screwed the elbow all the way in previously and it pointed up?

    Cheers,
    Aaron

  7. #6
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    52
    Posts
    1,938

    Default

    Quote Originally Posted by h4lcy0n View Post
    I don't quite get what you mean about once in the pipe it shouldn't do that?
    I think Barry is saying that the fitting won't be able to move (turn) once the pipe is attached to it.

    I have screwed the elbow all the way in previously and it pointed up?
    Put more tape on (in the manner bricks has described). If you put enough on, you should find that when screwing it on it begins to feel tight (but is not yet screwed fully home). Then just turn it to the angle you want and leave it. If you can easily screw the fitting fully home, then you need more tape.
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  8. #7
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default

    There is about 5 laps on it at the moment so I'll just start building up the end of the thread.

    Thanks for all the replies, I thought it had to be something simple.

    I Appericate everyone's help

  9. #8
    Join Date
    Feb 2008
    Location
    Sydney
    Posts
    66

    Default

    I find white teflon is usually better for plastic fittings as well.

  10. #9
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    52
    Posts
    1,938

    Default

    Quote Originally Posted by davo2310 View Post
    I find white teflon is usually better for plastic fittings as well.
    Why?

    Our local irrigation suppliers recommend pink tape ... although I'm not exactly sure why. I've used both white and pink tape on plastic fittings and haven't found the pink to be very different to the white, other than it "feels" a bit thicker/stronger.
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  11. #10
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default

    Another 15 laps later and here's the finished product, there is a nice snug seal now & the elbow is facing the right way. Thanks again



  12. #11
    Join Date
    Feb 2008
    Location
    Sydney
    Posts
    66

    Default

    [quote=Vernonv;706965]Why?


    I guess its a personal preference, I find it less likely to cross thread with poly to brass joins, and It seems to seal better.

  13. #12
    Join Date
    Jul 2007
    Location
    Sydney-south
    Posts
    333

    Default

    Or a little smear of loctite 567 over the teflon works well.
    Plumbers were around long before Jesus was a carpenter

  14. #13
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default

    OK next Question

    Do I need to use teflon tape the end of the poly pipe to ensure a good seal when connecting it into the fitting, or as long as the the cut is square all should be okay?

    Cheers,
    Aaron

  15. #14
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    52
    Posts
    1,938

    Default

    No. As you say, just cut it square.
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  16. #15
    Join Date
    Mar 2008
    Location
    Brisbane
    Posts
    25

    Default

    Quote Originally Posted by Vernonv View Post
    No. As you say, just cut it square.
    Any tricks to cutting it square?, the mire box / hacksaw doesn't seem to do so well & i don't have a pipe cutter.

Page 1 of 2 12 LastLast

Similar Threads

  1. 4" dusty fittings.
    By Toggy in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 9
    Last Post: 14th September 2009, 02:37 PM
  2. Bandsaw 25mm blade breakage.
    By Groggy in forum BANDSAWS
    Replies: 6
    Last Post: 4th September 2006, 06:51 AM
  3. 25mm 8'x4' sheet of ply - project
    By scooter in forum WOODWORK - GENERAL
    Replies: 9
    Last Post: 10th October 2005, 11:43 PM
  4. 25mm veneered MDF.... from where??
    By hsvls1255 in forum TIMBER
    Replies: 4
    Last Post: 26th August 2005, 10:55 PM
  5. Replies: 6
    Last Post: 6th August 2005, 02:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •