Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
1st June 2008, 10:13 PM #1
Another doover-based, niki-inspired, "featherboard" for planer
Knocked up something to help keep a board tight against the sole of the planer when using the Triton attachment. A bit of welding and a couple of rollers. Seems to work well.
Attachment 74545Attachment 74546Attachment 74547
It can be adjusted for height so that the featherboard pressure is centred. That was one of the problems that I had with using a magswitch featherboard. The other was that the magnets of the Magswitch located on one of the aluminium channels and did not hold with enough.
Attachment 74548Attachment 74549
The thing can also be moved closer or nearer to the planer.Last edited by jmk89; 1st June 2008 at 10:30 PM. Reason: Add pictures
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
1st June 2008 10:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
"I see stupid people!" or "spot the blithering idiot"
By journeyman Mick in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 46Last Post: 29th October 2010, 07:29 AM -
Difference "Galvanised" and "Primed" Steel
By Fr_303 in forum METALWORK FORUMReplies: 4Last Post: 22nd January 2008, 05:59 PM -
Triangles, "Copy" and "Past"
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 8Last Post: 14th February 2007, 08:06 PM -
Turned "red Ash", and "Hairy Walnut?"
By cedar n silky in forum WOODTURNING - GENERALReplies: 7Last Post: 25th July 2006, 02:01 AM -
"Shining gum" or "Nitens" - anyone heard of this
By AshleyM in forum TIMBERReplies: 10Last Post: 15th July 2005, 05:46 PM