Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Timber for oars in WA
-
4th August 2008, 05:41 PM #1procrastinator
- Join Date
- Aug 2006
- Location
- Collie
- Posts
- 93
Timber for oars in WA
What timber do people recommend for oars and can you suggest a supplier in WA?
The oars I intend making are for an Adirondack Guideboat and were traditionally around 8' long and often made from soft maple.
thanks
Kelvin
-
4th August 2008 05:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th August 2008, 07:03 PM #2
I don't know that I'd use the word 'recommend' but all my oars are made out of radiata pine It can be fun going through the shop's entire stock trying to find a plank that's clear or clear enough for your purposes, but's part of the joy.
Whatever you use, try to get both oars from one plank in an attempt to match their characteristics. That's not all that hard really.
Richard
(this is the only half hour I can dedicate to boat stuff this week - &^^%$#$ uni, it's worse this semester than last )
-
4th August 2008, 07:54 PM #3
When I bought a couple of bits of King Billy Pine for kayak paddles from a timberyard in Queenstown, Tas, an old timer there assured me that it was a good choice because he said people used to make oars from it. It made good kayak paddles.
-
5th August 2008, 03:17 AM #4
-
5th August 2008, 09:03 AM #5
-
5th August 2008, 03:31 PM #6
Good people the Bradshaws. One of the original timber-getting families on the West Coast.
Most of the forests they had been saw-logging for nearly a century were declared
"pristine wilderness" & locked up in the world heritage area. Media crews & activists
from both sides used the Bradshaws' logging tracks to access the area to "prove" their
respective points... Many half-truths & blatant lies told by both sides. Very unhappy
times all round, but a wonderful part of the world to live in.
cheers
Alan J
-
6th August 2008, 12:55 PM #7procrastinator
- Join Date
- Aug 2006
- Location
- Collie
- Posts
- 93
Thanks and more questions
Thanks for the suggestions.
Does anyone know how much effect weight has on oars? I'm guessing less than on paddles as most of the weight is supported by the rowlock but if it had no effect the competitive rowers wouldn't use carbon fibre.
Would Karri be too dense? Or maybe peppermint if I can find some? I remember my father saying it was good for buggy shafts so I think oars would have similar loads
thanks
Kelvin
-
6th August 2008, 01:23 PM #8
Go lighter if possible - weight is supported by the rowlocks but inertia of heavier oars
means you have to do more work pushing them around - starting & stopping them
twice on each stroke. Clear Oregon is fine for paddles, so I suspect it would be ok for
oars too. Or any other wood with similar properties. Lighter wood floats better when
dropped over the side too...
cheers
Similar Threads
-
what timber for oars?
By Knotaclue in forum BOAT RESOURCES / PRODUCT SEARCHReplies: 9Last Post: 15th January 2008, 09:32 PM -
suitable timber for oars
By soundman in forum BOAT BUILDING / REPAIRINGReplies: 5Last Post: 27th December 2007, 12:42 PM -
Orful oars
By 46150 in forum BOAT BUILDING / REPAIRINGReplies: 4Last Post: 29th December 2005, 04:04 PM -
Oars - timber aquisition brag
By Daddles in forum BOAT BUILDING / REPAIRINGReplies: 7Last Post: 10th September 2005, 09:57 PM -
A Simple Pair of Seven-Foot Oars
By Bob Smalser in forum WOODWORK - GENERALReplies: 10Last Post: 5th May 2005, 08:14 PM