Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Family Coat of Arms in relief
-
26th January 2009, 06:37 PM #1New Member
- Join Date
- Jan 2009
- Location
- nth qld
- Posts
- 2
Family Coat of Arms in relief
Hi all I'm new to the group. My query is as follows I want to carve a family coat of arms in relief on a slab of silky oak. I am after any suggestions as to wether to use hand tools or use say a dremel with various bits and as I am new to all this and haven't bought any specialised tools as yet your input would be greatly appreciated.
The piece of timber is approx 800mm X 800mm thanks greenant
-
26th January 2009 06:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th January 2009, 08:26 PM #2
best thing for this job -arbortec grinder Best regard m
-
26th January 2009, 10:02 PM #3
Hi Greenant,
My suggestion would be to dump the Silky Oak and find a nice piece of White Beech.
Use hand chisels.
Terry
-
27th January 2009, 12:05 AM #4Senior Member
- Join Date
- Jul 2007
- Location
- Loire , France
- Posts
- 349
You dont mention the thikness of the board- but if it's thick enough, say over 2" , (hey, I'm getting used to imperial measures), then you could achieve dramatic results going deep into the board, and THE tool is a plunge router.Some examples:
It's a slow and painful process...the secret is, dont mind the pain.(Ian Norbury)
________________________
Regards
Ivan Chonov
-
27th January 2009, 05:40 AM #5
definitely agree with schaf on the white beech greenant, make it easy on yourself,
you should be able to get hold of plenty up your way.
nice examples Artesano agree, the plunge router is a must, although I reckon there's probably a few more tools involved, some chisels perhaps
what if the hokey pokey is really what it's all about?
-
27th January 2009, 06:18 AM #6Senior Member
- Join Date
- Jul 2007
- Location
- Loire , France
- Posts
- 349
-
1st February 2009, 08:13 PM #7
Late comment on this thread (looks like that greenant has disappeared anyway).
Camphor laurel isn't too bad either. This was done with just a few Pfeil chisels.Traba non folis arborem aestima
-
1st February 2009, 08:41 PM #8New Member
- Join Date
- Jan 2009
- Location
- nth qld
- Posts
- 2
Thanks to everyone for their input
greenant
-
1st February 2009, 09:37 PM #9
great looking work guys very impressive. Makes me wanna go do my own coat of arms.
-
2nd February 2009, 12:08 AM #10Senior Member
- Join Date
- Jul 2007
- Location
- Loire , France
- Posts
- 349
-
2nd February 2009, 10:47 AM #11
Thanks Ivan: I've been appreciating your work (and Undy's) since joining this forum.
Camphor can have too much colour (contrasting grains) this piece was used because it had comparatively little colour.
Regards
NoelTraba non folis arborem aestima
Similar Threads
-
How to keep the numbers on my arms?
By blackhole in forum TRITON / GMCReplies: 9Last Post: 20th August 2008, 01:59 PM -
Relief for Zed
By Grunt in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 10Last Post: 14th July 2006, 08:22 AM -
Classic Arms Photos
By classic arms in forum WOODWORK PICSReplies: 13Last Post: 19th June 2006, 07:06 PM -
Family Coat Of Arms
By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 19th January 2006, 12:52 AM