Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Bevel ripping guide
-
15th May 2004, 11:02 PM #1
Bevel ripping guide
I have two units, the router table and stand and the compact saw table. I want to buy the Bevel ripping guide. The packaging on the box states it fit the work centre and the M3 but doesn't say anything about the compact saw. The guy at the local Bunnings wasn't sure either. T riton's website has this listed as an accessory for the saw table but does not give a part number. Does anyone know if it the same guide or are they different. Don't really want to buy one if it's wrong.
Thanks
Gary
-
15th May 2004 11:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th May 2004, 11:15 PM #2
There are two Bevel Ripping guides. The BRA200 for the 2000 Workstation and MK3 (with adapter) and the BRA100 for the compact saw table. They are different models.
The Triton site shows the guide fitted on the Compact table saw on the "compact saw table acessories" page. If in doubt on any model numbers or parts check the spare parts diagrams. This shows both models in PDF format.