- Giant BMH in action.
- Felder AF14 or 16
- Dust extractors noise ratings
- DC systems pressure testing
- Housing of Dust Collector (DC) external to workshop
- 100mm DWV pipe
- my shed, my thinking your suggestions
- Adelaidians attention
- CNC Router dust extraction
- Super dust deputy
- Beyond Tools - Flexible Anti Static Duct Duct
- Dust extractors
- Under bench dust collector
- Home Shop-Vac - a simple version
- Radial arm saw Dust extraction
- Source of long radius 90 deg bends.
- Would a boom work?
- Triton scroll saw help
- An improvement to drum sanders Mk1
- Its a start
- My Dusty Adventure
- DC enclosure and ducting set up
- Pipeonline
- RDC 1500 Renegade 1500W dust collector.
- Cyclone upgrade
- Options for a rental garage
- 6"/150mm pipe
- Shopvac auto-start adapters?
- Bastardising a room air cleaner into an enclosure.... ideas?
- help
- Wanted
- Where to buy Flexible hose?
- blast gate measurements.
- Good Value Dust Extractor
- Dust collector help pls
- Enclosed workshed with an extractor: external vent with no filter bag?
- Bell mouth hoods
- Leaf blower dust extraction??
- THE BEST how-not-to-do-it Youtube ever!
- dust and hand held power tools.
- Duravac Maxum
- turnable 90* elbow
- How good is Festool Kapex dust extraction?
- Anti start bypass Jet Dust collectoe
- Clearvue CV1800 - to filter or not to filter??
- 6"/150mm ducting advice
- Dust Extraction
- Highly flexible vacuum hose
- Dust extraction or lack there of
- Getting my dust extraction setup
- TS bladeguard port
- Cyclone - deciding whether to buy from interstate or build in Adelaide
- Air Filtration for Workshop
- Cleaning dust bags.
- Ducting path/location
- Cheap dust filter
- Deleted post, double posted. Sorry.
- Chip Collector/Dust extractor purchase questions.
- New Gyro Dust Extractor
- New dust source - high smoke point cooking oils.
- 2hp / 240v = 12a??
- Anyone Have CV Max and Not Installed it Yet?
- Epoxy ceramic dust capture
- south aussies looking for 100mmpvc
- Seeking feedback on setup please.
- An interesting BMH effect
- M class Gerni at Bunnings
- Bosch Dust Extractor with Festool Domino
- High Pressure Ducted System
- ShopVac, Aldav’s cyclone, Bushmiller’s bucket and a Spring Clean.
- Sturdee and his Triton gear
- PVC Fitting prices Sydney Upper North Shore
- Is it just me or is this actually counter-productive
- Dust Extraction for my new DwWalt power saw
- BMH on motor cycle engine.
- Reversing direction in cyclone
- Dust filtration levels
- New Dust Extraction setup
- Does anyone make DIY cyclones (other than Oneida Dust Deputy)?
- Hammer K3 Improving dust collectionmm and then into
- pre filter for vacuum
- Is bigger better
- Dust Collection Setup
- Carbatec pleated filter, new filter element?
- My overhead dust collection
- When is 225 PVC pipe not 225mm?
- It Wouldn't Happen to Me
- Health effects on seniors from short term exposure to fine dust.
- insert plate on table saw
- Harvey G700
- Clearvue adaptor
- Lathe and BMH
- Plastic bags
- Multiple cyclones in duct runs
- Carbatec 1.5HP Cyclone DE
- Dust, smoke and cooking sausages
- Build a cyclone. Very scientific testing near end of video.
- Fein 1350w vs Metabo 1400w vacuum cleaners
- shop vac or dust extractor
- 6" hose
- Testing out the Triton Full face respirator
- New dust extractor reccomendations and build log
- Dust extractor can/barrel?
- cartridge dust filter suppliers in Oz.
- PVC pipe setup
- Direct drive shed ventilation (not strictly dust but uses the sort of the same kit)
- Testo 405i Hot Wire Anemometer inappropriate for small (150mm) duct
- Giveaway- 10 150mm blast gated
- 2hp extracro
- Interesting air flow sensor developments
- Cyclone for shop vac issue
- Extraction Layout
- Air cleaner or not?
- 2hp DE Build
- To Buy a Kapex or Not
- Auto Blast Gates Australia is Now Open For Business
- 90mm PVC pipe for dust extractor
- ClearVue installation with Auto Blast Gates
- Ducting FAQ - suggestions for content
- Cartridge filters for wood dust- article
- Youtube find - Convenient blast gate manual control
- Q&D SCMS extraction
- DRAFT Ducting Recommendations
- Thein baffle vs Dust Deputy
- Sound proofing DC3
- cheap bellmouths
- Australian dust regulation
- new machine connection
- Motor size for dust blower
- Looking for supply of bell mouth hoods
- Bell mouth hood entry for ventilation impellers; some performance info
- DC for Single Machines
- Fielder extractors
- converting Sawstop from 4" to 6"
- Disintegrating flexible dust hose
- Help to bypass extractor on/off switch
- Recommendations for 3HP Dust Extractors
- 150mm to 100mm
- Blast gate plans
- 150 vs 160mm flex hose
- Testing mask filter media
- DE Outside vent to Custom Orb Colorbond profile - who has done it?
- Cyclone/shopvac trolley
- Cyclone vs Normal Dust Extractor - Which to get?
- Kreg router fence
- What size dust extractor.
- Dusty into rubbish bin
- Twin bag extractor not filling one bag
- Your thoughts and ideas please on dust collection for my new workshop?
- Best source for DWV fittings in Victoria?