- M. G. Contreras Flamenco Restoration
- Not sure if this is the right colour....
- Inlay finally done
- Help With Wood
- Hole filling
- Glenns new Projects!
- make your own metal saddle
- Truing Guitar Body Blank - Opinions please
- Help Required Selecting Switches and Pots
- New Build..New Design
- Body Blanks
- 2009 Montreal Guitar Show (Canada)
- Dark Grained string through SG...
- All Rosewood tele,
- Neck and body wood
- destroying brand new guitars
- re-gluing veneers?
- solid works design
- Acoustic Guitar
- parts of rosewood used to construct guitars
- Pickup Bobbin Winding Machines?
- Sassafras SG
- StewMac Dual Fret Scale Template ( Classical 650mm and 660mm )
- Drying and jointing in Melbourne
- Forest Oak for back and sides?
- Top Doming/Radius Preferred Method - Acoustic
- Stewmac's Deadblow Hammer
- Fret press
- Carvetop Firebird - BluesTone guitars
- WipeOn poly for guitar topcoating?
- Some thoughts on combining woods for hard bodies..
- Is White Knight Satin clear coat OK for a neck?
- 10x4" 10ply walnut snare drum
- Wanted - Coil/Pickup Winding Machine
- Harp , wood ?
- New Build - 1st from Scratch
- Rounding over bit size Strat
- Planers
- First post - seeking maple veneer and a spray colour to match Daphne Blue
- Zoom GFX 5 wanted
- Zero-T Homebrew ... The King-T
- Makore Set Neck
- violin from scratch
- New Build - Les Paul Junior DC
- U-Beaut`s going to need a bigger factory
- Cheap acoustic travel guitar
- alternative filler for shellac rubber
- African Mahogany
- Tools & Tips!
- polishing hard shellac
- gluing scarf joints.....
- Need fret help
- advice about veneer
- Hot pipe bending tools
- Australian Builders For A Less Saturated Market
- Evil Bay Bandsaw
- Decals...
- hope you enjoy this one
- First attempt at a tele template
- Just asking some tips!!
- 1st ever build started
- first Tele build
- Advice for a Novice
- Next build maybe,need advice.
- Decisions
- silver wattle for neck?
- aussie timber for neck?
- Aussie Timber for Neck-through Bass Build
- Speaking of Australian Neck Timber
- Thunderchild
- Which way to scarf?
- In My Shed part two
- wood cut out of the plan
- Truss rod help for new builder
- Bit of advice required
- Plans for First (tele-based) build
- Tasmanian Tonewoods
- Electric Violin
- Domestic & Imported Toona for soundboards
- New Build
- "Concept" Laminate Arch Top & sides
- 6 string + amp head build
- Buying Fretwire
- Brace wood
- Musical Instrument Forum
- A couple of new builds...
- Audio samples of builds?
- Musicmick1966 - in Finishing forum
- Straightedge - Veritas, Stewmac, Starrett or...?
- Tools and equipment needed for guitar building
- Hi all! Recent build, hand plane and greetings.
- Guitar neck finish
- alternative pore filler for hard shellac
- Guitar Making EMPLOYMENT OPPORTUNITY
- Ebonol Fingerboards
- truss rod!
- Building a 1951 Precision Bass
- the ethics milling of old growth timbers
- 14" bandsaw over on Marketplace.
- New guitar project
- sealing inside a chambered body?
- A must have in an acoustic builders shop
- Silly question - small block of alder?
- Acoustic guitar tools question.
- Update of where I'm up to
- Solid Body query from Timber forum
- First guitar build worklog.
- NC gloss finish application
- Is anybody using waterbourne lacquor?
- that great Gretsch colour
- Guitar tutor wanted Syd
- Carbatec Bandsaws for Guitar Building
- Experimental Instrument Prototype (think wiessenborn cross guqin cross I dunno)
- "Conjurer" New Metal Series Build
- Learning Lutherie
- New Build
- Australian Tonewood Sale - Victoria
- grain filler for mahogany acoustic
- Electric Guitar Build - Parts
- specialty screws where to buy?
- Australian guitar woods
- Bookmatched or Joined Fretboards?
- Back in BLACK....new homebrew electric
- Quilted Qld maple
- BluesTone guitars- Black Sassafrass bent sides singlecut semi-hollow
- Wedge tail eagle double cutaway
- Champhor Laurel as a tonewood
- G'zonta Drum tuning stand
- Fret slotting gone wrong
- from the far side of guitar building
- The Great Debate
- No Cost Spectrum Analysis
- Looking at buying a Thicknesser
- One piece neck - no fingerboard
- Sekorawa
- Finishing Fretboards
- First Go with a bit of Cheating...
- The cheap fret slot saw set up
- colour matching glue
- storing hard shellac
- Tops, where in Sydney?
- What finish for maple strat neck
- Aggh
- Designs for organising band power boards and leads
- Guitar body and neck finishing
- electic guitar / painted body / which wood?!
- A new neck to body joint
- template making
- Pat Sephtons Harps
- conn strobe tuner ?