This is the shed that I built

[Reno RSS Feed]

Pretty proud of myself with this one.
It's a 5.5m x 6m x 2.4m Stratco shed.
To go wider, I would have had to have 2 roller doors. I prefer the full access of the single door.
Except for the extra concrete strip, I have done all the work myself, on my own. :hpydans:

This is when I first moved in. A handy carport, but it's no shed.
http://i39.photobucket.com/albums/e173/captain_moto/Series201.jpg

I dug out and set a base for the pour of a new concrete strip.
http://i39.photobucket.com/albums/e173/captain_moto/Series203.jpg

The carport comes down.
http://i39.photobucket.com/albums/e173/captain_moto/Series204.jpg

Laying out the first side wall . . . this kit didn't come with an Ikea manual!
http://i39.photobucket.com/albums/e173/captain_moto/Series205.jpg

The frame is up.
http://i39.photobucket.com/albums/e173/captain_moto/Series206.jpg

Cladding goes on.
http://i39.photobucket.com/albums/e173/captain_moto/Series207.jpg

Lock-up stage.
The box on top is a Vent-Ridge to let fumes and smoke out.
http://i39.photobucket.com/albums/e173/captain_moto/Series209.jpg

Added a Mini-Me shed on the side, and rainwater tanks across the back.
http://i39.photobucket.com/albums/e173/captain_moto/Series211.jpg

Inside the add-on shed.
http://i39.photobucket.com/albums/e173/captain_moto/Compressor02.jpg

All dressed up inside.
The floor has an epoxy coating.
The left side western wall and ceiling have Foil-Board insulation sheeting.
http://i39.photobucket.com/albums/e173/captain_moto/ShedFront01.jpg

Set up some shelving to get a bit organised.
http://i39.photobucket.com/albums/e173/captain_moto/ShedInside03.jpg

I have since built a workbench, and mobile welding bench.
I'll post a pic of them soon.


[url=http://www.renovateforum.com/showthread.php?t=77364&goto=newpostRead the full thread at RenovateForum.com...[/url]