PDA

View Full Version : Box with lid



Ad de Crom
8th September 2009, 04:58 AM
First try to make an alder oval box with lid.
The fit of the lid is a little too loose, so not everything turned out so well for the first time.
Here some pictures.
Cheers, Ad

Gil Jones
8th September 2009, 08:39 AM
Nice little oval lidded box, Ad.
You seem to be on an oval roll; what is next...

Rum Pig
8th September 2009, 09:35 AM
Look nice and neat :2tsup:
It does not look like you have put a finish on or is that just my rum haze

artme
8th September 2009, 11:55 AM
What are the lengths of each axis on the lid Ad?

Ed Reiss
8th September 2009, 12:31 PM
:2tsup: noice Ad.

Ad de Crom
8th September 2009, 05:51 PM
Look nice and neat :2tsup:
It does not look like you have put a finish on or is that just my rum haze
I brought up three layers of blanc transparent lacquer, use always that stuff.
Best regards, Ad

Ad de Crom
8th September 2009, 05:55 PM
What are the lengths of each axis on the lid Ad?
Arthur, on the edge 155x120, on the top of the lid 110x75mm.
Was a bit tricky to do with the rotating runners so close nearby the chisel.
Ad

artme
9th September 2009, 08:57 AM
Arthur, on the edge 155x120, on the top of the lid 110x75mm.
Was a bit tricky to do with the rotating runners so close nearby the chisel.
Ad

:2tsup::2tsup::2tsup:

Texian
9th September 2009, 09:59 AM
Good looking piece Ad.