nadroj
2nd November 2009, 11:01 PM
I'm changing one of my machines to run on single phase. I'd like a compact, 2 button Start-Stop switch. Or, a rotary would do if I can't have push buttons. I don't need reverse or NVR. The only ones I can find are too bulky. It's for a 3/4 hp motor. Any pointers?
Keith_W
4th November 2009, 09:31 AM
Hi nadroj,
Most Pushbuttons are not latched types so you would need to have them switching a Relay or small Contactor. A Rotary Cam Switch maybe your better option, suggest you go to your local Electrical Wholesaller where they have the parts you need. A 10 Amp unit should be sufficant but take the Motor Specification details with you just in case.
Regards,
Keith.