Jacqui
12th November 2009, 04:38 PM
Hi
New to the forum and seeking advice on what I should pay for Formica and Laminex panels. Have had a couple of quotes but above what I expected.
Is the following considered reasonable?
Laminex Wenge;
16mm HMR P/B 2400x1200, $135.00 plus GST
18mm MR MDF 2400x1200, $180.00 plus GST
25mm std P/B 3600x1800, $400.00 plus GST (14 day wait for the board)
Formica Doe Skin;
16mm MR MDF 2400x1200, $135.00 plus GST
18mm std P/B 3600x1800, $196.00 plus GST
25mm std P/B 3600x1800, $240.00 plus GST
White HMR P/B;
16mm 2400x1200, $40 plus
18mm 2400x1800, $80 plus
Melamine Cutting;
$10.00 per square metre
Edging;
From $2/m to $5/m (applied) if in stock
If not in stock, then it is $2/m applied plus the cost of the roll.
New to the forum and seeking advice on what I should pay for Formica and Laminex panels. Have had a couple of quotes but above what I expected.
Is the following considered reasonable?
Laminex Wenge;
16mm HMR P/B 2400x1200, $135.00 plus GST
18mm MR MDF 2400x1200, $180.00 plus GST
25mm std P/B 3600x1800, $400.00 plus GST (14 day wait for the board)
Formica Doe Skin;
16mm MR MDF 2400x1200, $135.00 plus GST
18mm std P/B 3600x1800, $196.00 plus GST
25mm std P/B 3600x1800, $240.00 plus GST
White HMR P/B;
16mm 2400x1200, $40 plus
18mm 2400x1800, $80 plus
Melamine Cutting;
$10.00 per square metre
Edging;
From $2/m to $5/m (applied) if in stock
If not in stock, then it is $2/m applied plus the cost of the roll.