Simon Bowland
30th August 2004, 12:57 PM
Hey everyone,
I had about 140M of Merbau milled down to 90mm x 4mm. For use as a backdrop. When assembled the battens are attached in horizontal rows with velcro. The lengths range from 2.6M down to 0.5M and have been sealed on both sides with a clear coat. I realise 4mm is quite thin and some warping or twisting is to expected. However, I was after any advice on how to best minimise this during storage.
Cheers,
Simon.
I had about 140M of Merbau milled down to 90mm x 4mm. For use as a backdrop. When assembled the battens are attached in horizontal rows with velcro. The lengths range from 2.6M down to 0.5M and have been sealed on both sides with a clear coat. I realise 4mm is quite thin and some warping or twisting is to expected. However, I was after any advice on how to best minimise this during storage.
Cheers,
Simon.