Box Bits

[Librarian]

These are a series of pdf files with information specifically for Box Makers.

Box Bits # 1 Basic Re-sawing for Continuous Grain
(http://www.woodworkforums.com/photos/Box%20Bits%201.pdf)
(http://www.woodworkforums.com/photos/Box%20Bits%202.pdf) Box Bits # 2 Concealed Barrel Hinges 5mm (http://www.woodworkforums.com/photos/Box%20Bits%202.pdf)

Box Bits # 3 Concealed Barrel Hinges 8mm - 24mm (http://www.woodworkforums.com/photos/Box%20Bits%203.pdf)

Box Bits # 4 Accurately Mounting Concealed Barrel Hinges (http://www.woodworkforums.com/photos/Box%20Bits%204.pdf)

Box Bits # 5 Fitting Barbed/Slot Hinges (http://www.woodworkforums.com/photos/Box%20Bits%205.pdf)

Box Bits # 6 Mitre Keys
(http://www.woodworkforums.com/photos/Box%20Bits%206.pdf)
Box Bits # 7 Lid Lifts & Drawer Pulls (http://www.woodworkforums.com/photos/Box%20Bits%207.pdf)

Box Bits # 8 - Advanced Lifts & Pulls (http://www.woodworkforums.com/photos/Box%20Bits%208.pdf)

Box Bits #9 - A Four Corner Match Using a Single Length of Stock (http://www.woodworkforums.com/photos/Box%20Bits%209.pdf)

Box Bits #10 - A Routed Box (Principles) (http://www.woodworkforums.com/photos/Box%20Bits%2010.pdf)

Box Bits #11 - Wooden Hinges

- Nine Finger's Loooooong Hinge (http://www.woodworkforums.com/photos/Box%20Bits%2011A.pdf)

- A Wooden Hinge by Derek Cohen (http://www.woodworkforums.com/photos/Box%20Bits%2011B.pdf)

- Reinforced wooden hinges on the bandsaw by AlexS (http://www.woodworkforums.com/photos/Box%20Bits%2011C.pdf)

[madcraft]

Many thanks for the info will be invaluable

[jow104]

Box bits number 10 the link appears broken?

[DJ’s Timber]

Box bits number 10 the link appears broken?

Number 10 works fine me, unless you're referring to number 11?

The following three listed after #11 are #11 but are named instead but the PDF says they're 11a, 11b and 11c.


Box Bits #11 - Wooden Hinges

- Nine Finger's Loooooong Hinge (http://www.woodworkforums.com/photos/Box%20Bits%2011A.pdf)

- A Wooden Hinge by Derek Cohen (http://www.woodworkforums.com/photos/Box%20Bits%2011B.pdf)

- Reinforced wooden hinges on the bandsaw by AlexS (http://www.woodworkforums.com/photos/Box%20Bits%2011C.pdf)

[chrisb691]

'Box Bits #10 - A Routed Box (Principles)' doesn't work for me in IE 10, whereas all the others do, but works in Firefox.

[Bono]

Just started making boxes, will use some if not all of these principals

[Larkan]

Appreciate the time and effort to do this, thanks kindly. :D

Cheers, Kerry

[smiddo]

Sorry guys but i am just a newbie. Has anyone mad a perfect mitred grain matched box? I made one using a 45 degree chamfer bit and stops on the router table, there was no perceptible grain missmatch. It looked almost folded. if anyone else has done this wouldn't mind knowing.

[RecyclingKiwi]

All work for me via Firfox 46.01 in Linux Mint :)

[Template Tom]

Mistake in the article Barrel Hinges front view top view part 2