brenatbrisbane
20th April 2010, 08:39 PM
Can Anyone tell me if the ETA200 Maxi Ext can be used on a MK3 Workcentre?
rayintheuk
20th April 2010, 09:01 PM
Have a look at "Fig. 1" on Page 2 of this (http://www.raygirling.com/mk3assy.pdf) document, then see "Fig 5" on Page 3 of this (http://www.raygirling.com/eta300.pdf) one. If the mounting brackets (30 & 31) will fit on the bolt holes as shown, then you're good. If not, then not.
I'm afraid I don't know if the measurements are identical between the two models, but it's a place to start, I think. :)
Ray
dustmaster
27th April 2010, 07:09 PM
They most certainly will the backets are the same for both the MK3 and the 2000 you will have to drill two holes from memory on the MK3 to mount the brackets:2tsup: