Reno RSS Feed
10th August 2010, 09:20 PM
You can make your new garden shed vermin proof by adding a strip of timber along the inside of the form-work before you run the concrete in.
The timber strip should be a little bit wider than the tin profile, so that is sits on the ledge created by the timber around the outside.
Giving you the smallest gap possible between the wall and floor and providing some drainage.
Hope this helps.:)
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f83/vermin-proof-your-new-garden-shed-92431/)
The timber strip should be a little bit wider than the tin profile, so that is sits on the ledge created by the timber around the outside.
Giving you the smallest gap possible between the wall and floor and providing some drainage.
Hope this helps.:)
Read the full thread at RenovateForum.com... (http://www.renovateforum.com/f83/vermin-proof-your-new-garden-shed-92431/)