PDA

View Full Version : Not Just Pens



HazzaB
22nd August 2010, 04:04 PM
Hey There,

Just to show that I don't only do Pens, Here is a Segmented Bowl that I made out of Offcuts of Tassie Oak, Col (Blackbutt WA) saw my scrap Barrow and said there were a few pen blanks in there, so I thought that I may be able to get some Brownie points and make something for the LOML, She thinks it's the bestest thing.
It's 120mm high, about 110mm diameter, sanded to 320 and finished with EEE.

Thanks for Looking

HazzaB

RETIRED
22nd August 2010, 04:37 PM
Any thing over the EEE?

Manuka Jock
22nd August 2010, 05:20 PM
Hey There,

Just to show that I don't only do Pens, Here is a Segmented Bowl that I made out of Offcuts of Tassie Oak, Col (Blackbutt WA) saw my scrap Barrow and said there were a few pen blanks in there, so I thought that I may be able to get some Brownie points and make something for the LOML, She thinks it's the bestest thing.
It's 120mm high, about 110mm diameter, sanded to 320 and finished with EEE.

Thanks for Looking

HazzaB
Are ya gonna fill it up with pens ? :U

HazzaB
22nd August 2010, 05:29 PM
Hey There,

Hey , should there be anything over the EEE ???

Hey Jock, She can put anything in it that she likes:rolleyes:

HazzaB

RETIRED
22nd August 2010, 06:06 PM
Yep. EEE is an abrasive and needs a finish coat after application.

EEE-Ultra Shine (cut 'n' polish paste wax) (http://www.ubeaut.com.au/eee.htm)

bench1holio
22nd August 2010, 06:11 PM
:2tsup:nice one hazza!

ill have to post a few bowls also,its easy to get a bit sidetracked with this pen turning gig!:rolleyes:

artme
22nd August 2010, 06:41 PM
Nice bit of segmenting there Hazza!:2tsup:

HazzaB
22nd August 2010, 09:03 PM
Hey ,

Thanks for that, I turned off the bottom now so I will have to do a hand polish job on it, If I can get it back that is. '" Cut and Polish" I thought that that was it. I got some organoil at the Woodshow and when I read the directions, it'll take 3 days to do anything, I like the CA approach all done in a few minutes.

I might have to get a Polishers HandBook I think.:rolleyes:

HazzaB

orificiam
22nd August 2010, 09:29 PM
Very nice work there Hazza,:2tsup::2tsup:
Cheers Tony.:)