View Full Version : Vicmarc VL200 LONG SM EVS

Jim Carroll
9th September 2010, 09:12 PM
Vicmarc VL200 Long Bed Stand Mount Electronic Variable Speed

Based on the Original VL200 with a couple of changes.
The stand is made out of 3mm steel as against the normal 5mm which helps trim the weight from around 300kg down to 215kg. Still a heafty weight.

The electronics are the same type as used in the VL100 lathe.

With these 2 changes it has brought the price down to a respectable $4290.00

Have a look here (http://cws.au.com/shop/item/vicmarc-vl200-sm-evs-long-bed-lathe) for more info and place your order

12th September 2010, 10:38 AM
Hi Jim,
I already have the VL200.
With the change to the VL100 electonics reducing the price,
How much would it now cost to supply an EVS setup to my existing VL200

Jim Carroll
13th September 2010, 08:15 PM
Steve had to check this out and you would be looking at $1380.00 for the motor and electronics.