Gwhat
3rd May 2011, 06:04 PM
Hi all,
Woodpeckers are at it again, with 4 new ONE-TIME Tools;
95mm One Piece Carpenters Square (http://woodworksupplies.com.au/prod675.htm) 150mm One Piece Carpenters Square (http://woodworksupplies.com.au/prod676.htm) 300mm Carpenters Square (http://woodworksupplies.com.au/prod677.htm) 450mm Carpenters Square (http://woodworksupplies.com.au/prod678.htm)
http://woodworksupplies.com.au/images/Carpsqpair_sml.jpg http://woodworksupplies.com.au/images/Carpsq1_sml.jpg http://woodworksupplies.com.au/productimage_677_thumb.jpg
1 & 2 are machined from a solid block of aircraft grade aluminium, the main body is 5.6mm thick and the heal is 19mm wide, a virtually indestructable tool that is accurate to 0.0015" (1-1/2 thousandths of an inch or 0.0381mm) anywhere on the tool. They are hard anodised in the traditional Woodpecker red and are engraved with marks at every 1.0 millimetre.
The 150mm includes a handy built in protractor marked with the frequently used angles.
3 & 4 Are very precise right triangles with an attached heal that serves as a positive stop against the edge of a board. As for accuracy, when inspected with granite gauges, you'd be hard pressed to find any spot where you could fit a .001” feeler gauge.
Both legs are engraved with Metric scales in 1mm increments. Each square comes with a fitted wall mountable case.
As is the case with all ONE-Time Tools our allocation is strictly LIMITED so pre-order NOW for Mid July delivery.
Regards
Grahame
Woodpeckers are at it again, with 4 new ONE-TIME Tools;
95mm One Piece Carpenters Square (http://woodworksupplies.com.au/prod675.htm) 150mm One Piece Carpenters Square (http://woodworksupplies.com.au/prod676.htm) 300mm Carpenters Square (http://woodworksupplies.com.au/prod677.htm) 450mm Carpenters Square (http://woodworksupplies.com.au/prod678.htm)
http://woodworksupplies.com.au/images/Carpsqpair_sml.jpg http://woodworksupplies.com.au/images/Carpsq1_sml.jpg http://woodworksupplies.com.au/productimage_677_thumb.jpg
1 & 2 are machined from a solid block of aircraft grade aluminium, the main body is 5.6mm thick and the heal is 19mm wide, a virtually indestructable tool that is accurate to 0.0015" (1-1/2 thousandths of an inch or 0.0381mm) anywhere on the tool. They are hard anodised in the traditional Woodpecker red and are engraved with marks at every 1.0 millimetre.
The 150mm includes a handy built in protractor marked with the frequently used angles.
3 & 4 Are very precise right triangles with an attached heal that serves as a positive stop against the edge of a board. As for accuracy, when inspected with granite gauges, you'd be hard pressed to find any spot where you could fit a .001” feeler gauge.
Both legs are engraved with Metric scales in 1mm increments. Each square comes with a fitted wall mountable case.
As is the case with all ONE-Time Tools our allocation is strictly LIMITED so pre-order NOW for Mid July delivery.
Regards
Grahame