PDA

View Full Version : An Insert, Please.



issatree
11th June 2011, 01:06 AM
Hi All,
Can't think of where to put this, so I hope it is OK.

I bought a Black Nova Chuck, but it came off a Woodfast Lathe that is 1in.x 8TPI.
My TOUGH Lathe is 1in.x 10tpi.
So I'm after a 1in.x 10TPI. Insert for this Chuck.
Hope Someone can help.

Paul39
11th June 2011, 03:58 AM
Issatree, I find this: NOVA CHUCK INSERT/ADAPTORS (http://www.teknatool.com/products/Lathe_Accessories/adaptor_page.htm) And this: NOVA Dealers in Australia (http://www.teknatool.com/distributors/australia.htm)

Wizened of Oz
11th June 2011, 12:16 PM
PM sent.

Ozkaban
15th June 2011, 08:54 AM
I got an insert for a Vicmarc chuck by ringing Carbatec. They had several different sizes in stock. have you tried them?

Cheers,
Dave

tea lady
15th June 2011, 09:52 AM
I need a 1" 8 insert! Are you going to the Woodturning show on Sunday. We could swap!