colbra
23rd January 2012, 12:06 AM
Hi all I have just come across this bit of software Machinery Calculator (http://machinerycalculator.mysmart-tools.com/)
though it may be of interest to you marching people give us some feed back before I invest $5.00
Col:)
Dave J
23rd January 2012, 12:19 AM
If you have a use for the features it looks fine. There are probably free ones online but wont be all together like that one so that would make it handy as well.
For around $8 aus I think it would be OK.
Dave
matthew_g
23rd January 2012, 01:27 AM
Guys it cost $10.98 AUD.
I just had to try it and ..Well I have to say it lives up to the hype.
It has done everything it said it would.
It should actually make quite a good addition to the machine shop..
Dave J
23rd January 2012, 01:46 AM
Sounds good,:2tsup:
Some of the functions come standard on my DRO's, but the other features could be handy.
Dave