PDA

View Full Version : A great site to visit.....


matthew_g
28th January 2012, 03:53 AM
I have had this site in my fav list for soooo long it's not funny..
It was one of those save it for later things that was forgotten only to be re found this evening while looking for something else.:doh:
Turns out to be a fantastic site so I thought I would post it up for those that may not have been for a visit yet..

Happy reading. The Gizmologist's Lair (http://www.gizmology.net/)
Stustoys
28th January 2012, 10:16 AM
Hi Matthew

I like the guys thinking.
How To Cook A Huge Pizza (http://www.gizmology.net/pizza.htm)

Thanks

Stuart
eskimo
28th January 2012, 10:47 AM
Hi Matthew

I like the guys thinking.
How To Cook A Huge Pizza (http://www.gizmology.net/pizza.htm)

Thanks

Stuart

hahahaha:rotfl:
Dave J
28th January 2012, 12:54 PM
Looks like a good site Matt.

Stuart wouldn't all the cheese run off the end.:?

Dave
Stustoys
28th January 2012, 12:56 PM
Hi Dave,
Did you see the second picture?

Stuart
Dave J
28th January 2012, 12:59 PM
:doh::doh:

Now I see, LOL

Dave
morrisman
28th January 2012, 01:19 PM
Quite a good site . I printed out the info on the bearing nomenclature . Now I can impress the staff at BJ bearings with my knowledge :? MIKE
eskimo
29th January 2012, 09:04 AM
:doh::doh:

Now I see, LOL

Dave

duh.............glad you woke up dave...:D
Dave J
29th January 2012, 02:30 PM
Right O I know, :doh: anyway how do you have time to post, is that top taper bearing fitted yet,:D

Dave
Squirrel
29th January 2012, 06:05 PM
Had to have a second look at the pizza oven. Looked when thread was first posted just saw the pizza on a angle. After Stustoys comment realised what it was about.:doh:

Squirrel.
eskimo
30th January 2012, 10:08 AM
Right O I know, :doh: anyway how do you have time to post, is that top taper bearing fitted yet,:D

Dave

i'm waiting on a part
Dave J
30th January 2012, 05:17 PM
That wouldn't be Ray would it,
It is heat treated in the new oven now, :D

Dave
RayG
30th January 2012, 10:41 PM
i'm waiting on a part

Ahem.... It actually shuffled to the surface the other day and it took a while before I remembered what it was for.... :rolleyes:

Regards
Ray
Dave J
30th January 2012, 10:55 PM
He wont need it for a while now, he will be to busy aligning the headstock on his new lathe, LOL

Dave
RayG
30th January 2012, 11:00 PM
He wont need it for a while now, he will be to busy aligning the headstock on his new lathe, LOL

Dave

That's true, and then he can make his own.... :)

Regards
Ray
eskimo
31st January 2012, 07:54 AM
That's true, and then he can make his own.... :)

Regards
Ray

but I'm going to need to use the mill to make a part so that I can tram the lathe, so Ill need as soon as its been heat treated:D