Tramming an RF25

[Auskart]

What is the best way to tram an RF25, there doesn't seem to be much that is adjustable.

Thanks Shane

[morrisman]

I think you will have to use shims under the mounting base e,g,. under each corner until you get it close to perfect.

MIKE

[Auskart]

Thanks Mike, will give that a go. Cheers Shane.

[Dave J]

When you take the joint apart you may find some paint which could be throwing things out. Give both surfaces a good clean and go from there with your shims if needed. Aluminium cans or foil are something most of us have around, and cheap feeler gauges work good as well. Dave