PDA

View Full Version : MC900/1100 Clamp handles



Osbojo
24th February 2012, 12:09 PM
I've searched the forum and internet for sourcing the tool post and headstock spring loaded handles. The aluminium moulding has stripped on mine where it locks into the steel screw so I have temporarily epoxied them but of course it's a pain especially at the tool holder. At least one other in the club has had the same issue so it look like a common problem and he couldn't source them so uses wing knobs.

Anybody managed to get hold of these?

Os.

Acco
24th February 2012, 12:31 PM
Most engineering supplies such as A & A Industrial Supplies Pty Ltd in Bayswater stock them.

This mob (http://maxiloc.com.au/maxiloc_catalogue.php?catid=CLT&subcatid=CLALEV) in Thomastown has them on their website, are these the ones you mean?

Osbojo
24th February 2012, 04:23 PM
Most engineering supplies such as A & A Industrial Supplies Pty Ltd in Bayswater stock them.

This mob (http://maxiloc.com.au/maxiloc_catalogue.php?catid=CLT&subcatid=CLALEV) in Thomastown has them on their website, are these the ones you mean?
That's exactly the thing, now at least I know what they're called. I'll get down to A&A as I'm in Noth Ringwood. Many thanks for that

Os

dr4g0nfly
24th February 2012, 06:53 PM
Another name for them is 'Bristol Levers'

vk4
24th February 2012, 10:40 PM
CARBA TECH , HARE &FORBES both sell these machines they should be abl;e to supply replacement handles

Jeff

Acco
25th February 2012, 12:11 AM
That's exactly the thing, now at least I know what they're called. I'll get down to A&A as I'm in Noth Ringwood. Many thanks for that

Os

:2tsup: