Woodmaster Multi Tool parts.

[Patonga]

would anybody know where I may be able to pick up parts for a Taiwanese built Wood Master Multi Tool. Specifically I am after a tyre for the band saw attachment. The wheel is 270 mm. diameter and the tyre needs to be about 20mm wide. Possibly one from another brand would suit. This is a knock off of a "Shop Smith" and they probably have one that fits but do not ship outside the U.S.
Any help appreciated.

[Stewie D]

If you do a search on the forums here for something like bandsaw tyre or bandsaw rubber you should get a few posts about companies that make them.
Here's one
http://www.woodworkforums.com/f27/bandsaw-tyres-103203/#post1044055
although they talk about US suppliers...

Stewie

[Patonga]

Thanks for the reply Stewie D. There are a couple of leads there. I think I can get them from the U.S. from Carter or allbandsawblades.com but would prefer to buy them in Oz if possible.

[Stewie D]

If you don't mind getting your tyres off another make try some of the local toolshops and see if they have something close to the 270mm in size.
Or
help with bandsaw tyres - Woodwork Forums (http://mt1.woodworkforums.com/f27/help-bandsaw-tyres-3732/)
etc

Stewie

[Patonga]

If you don't mind getting your tyres off another make try some of the local toolshops and see if they have something close to the 270mm in size.
Or
help with bandsaw tyres - Woodwork Forums (http://mt1.woodworkforums.com/f27/help-bandsaw-tyres-3732/)
etc

Stewie

Thanks for the replies people. Carba-Tec Perth had some which did the trick.