Jim Carroll
26th March 2012, 01:28 PM
The Timberly Grinding Spacer Set (http://cws.au.com/shop/item/timberly-grinding-spacers-set) is used in conjunction with your Tru-grind sharpening jig. (http://cws.au.com/shop/item/tru-grind-sharpening-system)
This allows you to get the repeatability required when using the jig and takes into account the wearing down of the wheel in normal use. The settings are for the 4 standard angles 30, 35, 45 and 55 degrees. If you prefer different angles then you could make your own jigs to suit.
The instructions that come with the jig make it easy for you to use.
Can be used with any 6" or 8" bench grinder and also with grinders that have the Optigrind CBN wheels (http://cws.au.com/shop/category/optigrind-cbn-grinding-wheels)
This allows you to get the repeatability required when using the jig and takes into account the wearing down of the wheel in normal use. The settings are for the 4 standard angles 30, 35, 45 and 55 degrees. If you prefer different angles then you could make your own jigs to suit.
The instructions that come with the jig make it easy for you to use.
Can be used with any 6" or 8" bench grinder and also with grinders that have the Optigrind CBN wheels (http://cws.au.com/shop/category/optigrind-cbn-grinding-wheels)