PDA

View Full Version : jacaranda bowl



smiife
1st May 2012, 09:01 PM
hi guys,
jacaranda bowl ,300mmx90mm
first attempt at texturing and colouring ,didn't turn out to bad
any comments and advice appreciated:2tsup:
cheers smiife:2tsup:

mick59wests
1st May 2012, 09:27 PM
really nice:2tsup::2tsup::2tsup:. I'll have to convice SWMBO about cutting ours down but am not sure I can get one 300mm or make it as nice as that.

Well done

Mick

mick59wests
1st May 2012, 09:28 PM
also, you will have to say how you did the colouring/texturing
cheers
Mick

turnerted
1st May 2012, 09:38 PM
Nice looking bowl.The texturing and flameing(?) certainly add to it.
Ted

Skewturn
2nd May 2012, 12:49 AM
:2tsup:Nice Bowl, the texturing looks good and its great that youve done the base
a lot of bowls dont have that.:cool:

dr4g0nfly
2nd May 2012, 06:58 AM
great Bowl, and I also am impressed with the finish effect you've achieved on the foot.

vtbao
2nd May 2012, 11:16 AM
Very nice, I like it! well done

redlaci2004
2nd May 2012, 04:47 PM
Absolutely beautiful. As mentioned above, some information on how you did the fine detail would be great.

Ad de Crom
2nd May 2012, 06:32 PM
Really beautiful.
Ad :2tsup:

kcam
2nd May 2012, 07:23 PM
Nice looking bowl smiife, excellent finish and you achieved a good affect with your texturing and off centre turning.....suggest that you experiment with a bit more random approach to the texturing say using two different size burs (i.e. try and avoid straight lines)....:D

smiife
2nd May 2012, 08:30 PM
hi guys,
thanks for your comments very much appreciated
firstly the texturing was done with small burr bit in my dremel
and the colouring was just acrylic paint applied with a brush
firstly black,alowed to dry then painted with gold acylic and rubbed
off before it dried,i did have to return it to the lathe to tidy up the edge
and also vacumn chucked it to remove the bottom and repeat the
texturing and colouring the same as the top
kcam thanks for the advice i can see what you mean,the bottom
is a bit ''in line''isn't it :doh:
i also tried spirit stain before the paint and splashed it ever where
and ruined another bowl i attempted before this one,any tips on ''how to''
would be great
cheers smiife:2tsup:

artme
3rd May 2012, 02:09 PM
:o:o Great work!!:2tsup::2tsup::2tsup: