Finish for a hardwood workbench

[mikeyandmary]

Hi all,

I have just built a workbench from recycled hardwood. The bench is going to be used for general garage/shed/workshop duties. I would like to protect the surface a little from paint and grease/oil spills without covering the benchtop with a sheet of MDF etc

Does it need to be finished with lacquer or something else? I was thinking of polyurethane finish.

Thanks for the wisdom...
Michael

[dr4g0nfly]

Personally mine had a couple of coats of Boiled Linseed Oil and gets wiped over again whenever it needs a refresh because of scratches or other marks.

[NCArcher]

I'll second the BLO. Super easy to maintain.
I drilled some additional dog holes yesterday. A quick sand and a wipe over with BLO and they look like they have been there the whole time